bank bank
bank bank
bank bank
Loyalty Programme
bank bank

Epson Stylus Photo R270

  • 153.99 £
    not in stock
  • Report when the product is available again

    let me know

Epson Stylus Photo R270: a small photo lab at your home

There are newly developed dye-based inks Epson Claria used in an Epson Stylus Photo R270 which were been created specially for home digital photo printing. According to the producer company these inks allow to get more bright and deep colors on the photo prints. If using the recommended photographic paper from Epson company besides the mentioned inks then you can get photos with stability to daylight up to 200 years.

Printer Epson Stylus Photo R270The printer Epson R270 has also a function of printing on the surface of CD/DVD discs and gives additional possibilities of direct printing of documents and photos from different media storages, including digital camera using an application PictBridge or USB Direct Print without mediation of computer. These functions of Epson WorkForce WF-2530WF and Epson Expression Premium XP-800 were clearly demonstrated on the presentations in London and in Manchester.

Inkjet printer Epson Photo R270 has the printing speed of monochrome A4 documents around 30 pages/minute. Toner cartridge is enough for 250 pages printed in color or black and white monochrome printing. Ink unit is changed without changing the printing head, the printer allows setting two or more cartridges.

 Epson Stylus Photo R270

Printer Type Epson R270
six-color (CLcMLmYK)

Printing Technology
Inkjet (piezoelectric)

Print Direction
bi-directional printing with logic seeking, optimized for text and graphics

The maximum resolution
5760 × 1440 dpi, optimized (Resolution Performance Management)

Maximum print size

The minimum drop size
1,5 pl

The configuration of the nozzles
90 × 6 (black, cyan, light cyan, magenta, light magenta, yellow)

Print Speed
A4 text, b / w, Economy Mode: 30 pages / min
A4 text, color, Economy Mode: 30 pages / min
10 × 15 cm photos, Fine Mode: 30 sec / image
10 × 15 cm photo, Draft Mode: 13 sec / image

USB Hi-Speed ​​(USB 2.0)

The paper tray

Media format
10 × 15 cm, 10 "× 8", 13 × 18 cm, 13 × 20 cm, 16:9 Wide size, 20 × 25 cm, 3.5 × 5 ", 4" × 6 ", 5" × 8 ", 9 × 13 cm, A4, A5, A6, B5, CD 12 cm, CD 8 cm, Legal, Letter, MCD, envelope C6 (114 × 162 mm), envelope DL (110 × 220 mm), number 10 envelope (104 × 240 mm)

The density of the carrier
64-90 g / m ² (plain), a maximum of 300 g / m ² (for original media Epson)

The boundaries of the print area (on all four edges of the sheet)
0 mm top, bottom, left, right / 3 mm top, bottom, left, right

Drivers for Windows
Mac OS 10.2.8 and above, Mac OS 10.3.9 and above, Windows 2000, Windows 98, Windows Me, Windows XP, Windows XP x64

PictBridge support

USB Direct Print

Print Image Matching Support

Support Exif Print (Exif 2.2)

Printing on CD
CD / DVD discs 8 cm, 12 cm and MCD

Borderless Printing

The minimum computer configuration
Windows 98 SE
Pentium 233 MHz, memory (RAM) 128 MB free space on your hard drive (HDD) 70 MB (98 SE - only USB 1.1)
Windows Me / Windows 2000/Windows XP
Pentium III 500 MHz, RAM (RAM) 512 MB free space on your hard drive (HHD) 2,5 GB
Windows XP Professional x64 Edition
See System Requirements OS
Mac OS X 10.2.8 or later
PowerPC G3 233 MHz, memory (RAM) 128 MB free hard disk space 100 MB
Mac OS X 10.3.9 or later
PowerPC G4 700 MHz or Intel, memory (RAM) 512 MB free hard disk space 3.5 GB

Operating voltage: 220-240 B
AC Frequency: 50-60 Hz
Power Consumption Printing: 12 W
Power consumption in standby mode: 1.1 W

Standard dimensions (L × W × H)
453 × 343 × 194 mm

Overall dimensions when you print (L × W × H)
453 × 538 × 285 mm

6.5 kg

Service conditions
Operating temperature: 10 to 35 ° C
Use a relative humidity of 20 to 80%

Number of colors:

dye-based ink "INKSYSTEM" (South Korea), 6 colors 130 ml

Material of CISS:

1 year

Country of origin:
South Korea

the same as original

Numbers of original cartridges:
T0822, T0824, T0821, T0825, T0826, T0823

Installation Manual on Continuous ink supply system (CISS) For EPSON R270

Thank you for using the “INKSYSTEM” Continuous ink supply system. It is the best device for an inkjet printer, and it will definitely decrease your printing costs. Before using this system, please read this manual carefully. The pictures in this manual may be different with the real ones. Here just for your reference.
Remarks: Some pictures maybe different from the real products, especially for the external ink tank, these pictures are just for reference, please handle according the real products.

I. Inspection before installation

A. Check whether all the accessories are available or not.
B. Check whether the system is pulling out if tube is disconnected

II. Test printer
1. Check the printer status, and its mechanics for any damage.

2. Print a test sheet on nozzle check to see if there are gaps in lines on the printout.

3. If printer is alright, please print a picture to see the result.
Note: This system will not cause any damage on your printer.

Ill. Installation Procedures

1. Setting up the system
Put this system on the left side of printer, tidy up ink flow tubes (3-1-1), pull the air balance plug out and replace it with an air filter with the bigger side down-wards (3-1-2).This is repeated for each air balance plug. Keep the air balance plugs for future use.

2. Move out cartridge holder:
A. R260/R265/R270
Press "cartridge change" button (3-2-1), move cartridge holder out to cartridge change position, plug off power source (3-2-2).

B. R360/R380/R390

С. RX560/RX580/RX590/ RX585/RX595/R^610/RX680

Press "setup", Press " ►" to InkLevels" , then press "OK" , press "▼" to "Change Ink Cartridge" , choose "OK". Mover out cartridge holder (3-2-3), plug off the power source.

3. Take cartridge cover off
A. R260/R265/R270

B. R360/R380/R390
Use screwdriver (3-3-1), push screwdriver forward to let cartridge cover move for 2mm (3-3-2), use hand to press cover clip, use screwdriver to insert position, lift up the clip upside (if clip broke, it does not matter), then take away cover clip and take cartridge cover off.

C.RX560/RX580/RX590/RX585/RX595/RX61 0/RX680/RX685/RX690
Open cartridge cover a little, insert screwdriver, push screwdriver, lift up cartridge cover, and then take cover off.

4. Insert ink cartridges
Take out original ink cartridges, insert system cartridges according the color order, press down the cartridges tightly (3-4-1).

5. Adjust tube fix
A.R260/R265/R270 no needs adjustment

B. R280/R285/R290 no needs adjustment

C.R360/R380/R390 no needs adjustment

D.RX560/RX580/RX590 needs adjustment as follows:
The two stickers of these models should do adjustment (unless dealers do it in advance), otherwise, it will damage the function. Use one hand to scratch ink tube, another hand mover first sticker to 2cm as 3-5-1, then move second sticker to 8cm as 3-5-2.

6. Fix ink tube
A. R280/R285/R290
Tidy up ink tube, fix tube as (3-6-1). During printing, the ink tube and sticker can't be pulled off, can't be twist as (3-6-2).

B. R260/R265/R270

Tidy up ink tube, fix tub. During printing, the ink tube and sticker can't be pulled off, can't be twist.

Tidy up ink tube, fix tube. During printing, the ink tube and sticker can't be pulled off, can't be twist

7. Check ink tube
Move cartridge holder, be sure it will not be clogged by sticker, then move cartridge holder to left side(3-7-1), then to right side(3-7-2), check if the ink tube will be too long or too short. Generally, the tube has been adjusted to the right size before shipment, please double check.

8. Adjust tube length
If step 7 is ok, skip this step.
Press sticker, then lengthen it (3-8-1) or shorten it (3-8-2), redo step 8 to adjust tube to right lengthen.

9. Fix ink tube
A. R280/R285/R290

B. R260/R265/R270

C. R360/R380/R390: Fix sticker to 3-9-1, pay attention not let printer cover to crush ink tube when close the cover (3-9-2), otherwise the ink can not flow smoothly

D. RX560/RX580/RX590/RX585/RX595/RX610/RX680/RX690

10. Ready for print
Plug power source on (3-10-1), turn the printer on (3-10-2), and check if printer work or not.

11. Test printer nozzle
Enter printer nozzle inspection option (3-11-1), print nozzle test sheet. If it is normal (3-11-2), then start printing. If line is missing (3-11-3), please clean the nozzle cleaning. If one color is missing , then maybe there is air in nozzle. If it is still a little line missing after cleaning, please turn printer off and let it stay turned off for one hour or more. Please contact your local distributor if still have problem.

. Product Warranty
INKSYSTEM warrants its products to be free from defects in material or workmanship. Rarely the equipment partly or completely fails within the warranty period. In these cases we do everything possible to ensure that our customers are satisfied with the purchase.
The INKSYSTEM CISS installation is free in any of the representative offices.
The warranty repairs are done quickly, with good quality and for free. The warranty duration is 12 months from the date of retail sale. Every product has a Warranty Certificate. The transportation of the failed product is provided by its owner.
Please note that the ink and the photo paper are expendable materials and there can be no returning of unsealed ink tanks and photo paper packages. When defects are found by the service managers, a replacement for a new product is performed.

Please adhere to the following points to receive a warranty service as soon as possible:

When accepting the product check if the warranty certificate is filled in correctly.

Keep the original receipt that contains the date of purchase information.
Adhere to operating conditions that are provided in the User’s Manual, or on the web-page of the specific product.
Try to avoid mechanical damages when operating the product: chippings, dents, fractures, scratches, etc.

We cannot provide a warranty repair under several conditions:

If the warranty certificate is wrongly filled in.
If the device has mechanical damages: chippings, dents, fractures, scratches, etc.
If the defect appeared under the circumstances of insuperable forces, accidents, intended or careless actions of the user or a third party.
If the ink used was not manufactured by “INKSYSTEM” (South Korea)
If the printing limit was exceeded – more than 100 000 prints.

The “INKSYSTEM” Company excludes for itself any liability for incidental, consequential, indirect, special, or punitive damages of any kind to people, pets or property if the stated damages have been affected because of rules and operational conditions / product installation disregard. The Company also excludes any liability for intentional or careless actions of the user or third parties, for loss of revenue or profits, loss of business, loss of information or date, or other financial loss arising out of or in connection with the sale, installation, maintenance, use, performance, failure, or interruption of the possibility of such damages.

We ordered Stylus Photo R270 with continuous ink supply system. The printer has “A” for his work. CISS gives opportunity to reduce expenses on black and white and color printing enormously! Refilling of containers for ink is very handy. In the INKSYSTEM shop we found the most reasonable prices and detailed specifications of the model. It seems that the company really take care of its clients. Thanks for that.
Nicholas,Lichfield 23/10/2012, 11:11

It is unbelievable – a great printer! Now I advise all my friends to buy it only with CISS.
Mia ,Ringwood 19/12/2012, 12:25

Your name:

Your City:


Confirmation code

Do not forget to buy!
Dye-based ink INKSYSTEM Black 100 ml (South Korea)
*incl. VAT
excl. ink and shipping price
6 £
Set of dye-based ink INKSYSTEM 100 ml (6 colours)
*incl. VAT
excl. ink and shipping price
36 £
Set of dye-based ink INKSYSTEM 1000 ml (6 colours)
*incl. VAT
excl. ink and shipping price
174 £

You have chosen Epson Stylus Photo R270

153.99 £
You can save ##economy## £
Would you like to buy the second set of ink with a discount and save ##economy## £?
Yes, I'd love to!
No, thanks!