bank bank
bank bank
bank bank
Loyalty Programme
bank bank

Epson Stylus Photo R200

  • 141.16 £
    not in stock
  • Report when the product is available again

    let me know

Epson Stylus Photo R200

The device of epson photo stylus r200 is doubtlessly the greatest choice you may ever make when choosing some relevant printer for your home and your office. You can get this multifunctional office machine equipped with a CISS just for a pretty low cost. That is surely the prime reason why small office owners in London, Nottingham, Manchester, Birmingham, Edinburgh choose this model. Therefore if you are still seeking for a professional and cheap photo printer it is a smart step to pay your greatest attention to epson printer r200.


Printer Epson R200

If you ask me what shape an epson stylus photo r200 printer is, it will be not any complicated to explain. Like the great majority of printers produced by Epson, this model is a cube - shaped unit offered in matt black with some glossy silver parts. But I must admit that epson stylus r200 printer doesn't look any gloomy, it is quite modest and styled, in my personal opinion.

The fact that is worth admitting concerning the design of photo r200 is that it is only 5,2 kg and 462 x 196 x 263 mm when stored, and in working condition it is about 462 x 297 x 474 mm. that is why I am sure that you will find it easy to place it cozily in your home office. As usual, the front panel involves several control buttons. They are of the same colour so the buttons are not too annoying. At the same time they are of medium size to be easy pushed. Two cassette-like paper trays are hidden beneath offering the capacity of 120 pages.

Key features

To get the most accurate and precise printing results for your photos and documents, you are better to use 64 - 90 g/m2; but this device generally supports up to 255 g/m2, if you choose to print in Envelope mode? You are to take paper of 45 - 75 g/m2. The model of printer epson r200 is able to produce pictures of the resolution of 5760 x 1440 dpi, but using the optimization of the printer's carrier is preferable. The r200 epson inkjet photo printer solution is pretty a speedy one as it prints black-and-white text in economy mode producing 15 pages per minute, as well as colored text of A4 format is delivered with the speed of 15 pages per minute.

Of course, you are likely to want to print photos on your r200 stylus. You will have a high quality photo (10 x 15 cm) in just 36 seconds, if you use the Fine mode. In addition, you can print on disks used for inkjet printing. You can also choose either of document types you want: A4, Legal, Letter, 13x18 cm, 20x25 cm, 9x13 cm, 10x15 cm, 102x181 mm, 13x20 cm, A5, A6, B5, Envelopes, Half Letter, and, naturally, User Defined.

Additional functions

This stylus photo r200 has usual interface with Hi-Speed USB, so you can use it with any sort of computer. R200 can be used for a straight line printing from compatible digital cameras, that is without using a computer. In order to make using of Epson Stylus Photo R220 more comfortable for the clients, Epson's company makes their office appliances ready to be used with the most popular Mac 10.3.9 and Windows 2000/XP/XP-x64/Vista, or some other modern OS.

Epson Expression Premium XP-605 is famous for its incredibly low power consumption which is only 12 watts. The good news for customers is that is getting rather low these days. You can get your photo printer of the model R220, but if you choose to have it with continuous ink supply system and set of photo ink (6 cartridges each130 ml), you will get the device ready for work for considerably lower cost compared if you choose to purchase all these devices separately. In fact, your CISS will be installed onto your R220 without any additional charge, as the policy of Epson's company is to provide their client with high quality services for low cost.

 Epson Stylus Photo R200

Printing Technology Epson R200
Jet piezoelectric printing

Volume drops
3 picoliters

Paper Weight
64 - 90 g/m2; supports EPSON: up to 255 g/m2, envelopes: 45 - 75 g/m2

Media Types
Plain paper, inkjet photo printing, envelopes,

Print on CD / DVD
You can print on disks coated for inkjet printing

Black / white text in economy mode: 15 pages / min., Colored text A4: 15 pages / min., Photo 10 x 15 cm in the mode of Fine: 36 seconds

3 mm top, left and right, 14 mm from the bottom; can print borderless

Paper feeder
120 sheets

540 nozzles (6 colors to 90 nozzles per color)

5760 x 1440 dpi using the optimization of the carrier

Matching colors
Windows 98/Me/2000/XP ICM, sRGB (Windows 98/Me/2000/XP); Apple ColorSync 2.0

Noise level
42 dBA

Direct Printing
Can a straight line (without using a computer) printing from compatible digital cameras

2 x USB 1.1 (1 in front) interface cable sold separately

A4; Custom sizes - 89 x 89 mm to 216 mm x 1117.6

OS Support
Windows 98, Me, 2000, XP; Mac OS

Power consumption
12 watts

Dimensions (width x height x depth)
462 x 196 x 263 mm, and in working condition - 462 x 297 x 474 mm

Dimensions of packaging
53 x 31.5 x 27 cm

5.2 kg

Gross weight
6.9 kg
CISS for Epson R200

Number of colors:

dye-based ink "INKSYSTEM" (South Korea), 6 colors 130 ml

Material of CISS:

2 years

Country of origin:
South Korea

the same as original

Numbers of original cartridges:

Installation Manual on Continuous ink supply system (CISS) For EPSON R200

Thank you for using the “INKSYSTEM” Continuous ink supply system. It is the best device for an inkjet printer, and it will definitely decrease your printing costs. Before using this system, please read this manual carefully. The pictures in this manual may be different with the real ones. Here just for your reference.
Remarks: Some pictures maybe different from the real products, especially for the external ink tank, these pictures are just for reference, please handle according the real products.

I. Inspection before installation
A. Check whether all the accessories are available or not.
B. Check whether the system is pulling out or too much air remained in the connecting tubes (length over 20cm).
If any items are missing, or any problems are presented, please, contact your dealer.

II. Test printer

1. Check printer status to see whether it is normal or not, and check its mechanics for smooth and any damage.

2. Print a test sheet on nozzle check to see if gaps appear on lines in the printout.

III. Installation Procedures

1. Setting up the system
Put this system on the left side of printer, tidy up ink flow tubes, pull the air balance plug out and replace it with an air filter with the bigger side down-wards. This is repeated for each air balance plug. Keep the air balance plugs for future use.

2. Move out cartridge holder
Press cartridge change button, move cartridge out (3-2-1), plug power source off.

3.Install ink cartridges
Take original cartridges out, move cartridge holder out to the left side (3-3-1), install the cartridges according to color order, press back cartridge cover.

4. Fix ink tube
Peel sticker off, tidy up ink tube, fix ink tube on printer. During printing, the sticker can't be taken off and ink tube can't be twisted.

5. Check tube length
Move cartridge holder to the left side, then right side and check whether ink tubeis too long or too short. Move cartridge holder to the cartridge-changing place and check whether Ink tube will fall on the paper board. Generally, we have adjusted ink tube to the right size before shipment (lf it is too long or too short, please double check before printing).

6. Adjust tube length
If step 6 is ok, then there is no need to go through this step.
If the tube length is too short then lengthen it, if too long then shorten. If the tube falls down, you need adjust the angle of sticker to prevent falling.

7. Fix ink tube
Fix ink tube according to picture, when close printer cover, the pressure on ink tube should be tight, can not be too heavy to stop ink-flow.

8. Ready for printing
Plug power source on (3-8-1), turn the printer on (3-8-2), and check if printer works or not.

9. Test printer nozzle
Select the option for printer nozzle check (3-9-1), print test sheet, if it is alright, you can start using the printer normally. If it is not, please clean the nozzle. If only line is missing for one color after cleaning several times, turn off the printer and let it stay turned off for one hour or more. The air bubble clogging up the nozzle is likely to dissipate, allowing you to print. If you still have problems, please contact your local distributor.

IV. Ink Amount Reset

It is requires to change cartridges while printing (4-1-1) and ink light flash (4-1-2). Press ink button to move out cartridge holder. Press chip reset button for 3 seconds (4-1-3), repress ink button to move back cartridge holder, then ink amount shows 99% again. Redo nozzle inspection and printer can run normally if it is alright. (Black and other colors can be handled by the same method).
Note: Distinguish two kinds of chips. The manipulation is the same. The difference is that the chips with transferred switch should be switched downwards (4-1-1), otherwise, chips cannot be recognized.

V. Removing used continuous ink supply system

Replace air filters with air plugs (5-1-1).Move out cartridge holder and take the rack off. Take the cartridges out (5-1-2) and place the cartridges on the tissue with the ink flow nozzle downwards, and let the tissue at the same level with the system ink tank (5-1-3).

VI. Refill ink

During printing, if you found out that the ink level in the tank is below the red line, please add ink according to the methods.

VII. Check air balance tube

During printing, if you find some abnormal cases, such as bad output, ink drip out on paper, then you need to check the air balance tube to see if exist ink. If yes, please do according to the manual of "ink pump out from balance tube”.

VIII. Warnings

1. During printing, please do not take cartridges over than the printer. Please keep ink tank and printer in the same level.
2. During printing, do not inverse, lift up or lower ink tanks.
3. Please do not block up ink tanks for curiosity or for fear of less ink
4. Use CISS at clean environment and within the temperature range 15-35 degrees.
5. Please use high-quality ink to prolong and to increase printing quality.
6. During shipment or storage, please do not turn the system over and always have the holes sealed with plugs, to prevent ink leakage.
7. Please do not shake cartridges to avoid leaking.
8. Please do not unplug joint elbow, do not tear off adhesive tape seal that at the bottom of cartridge, do not touch the IС chips that sideways.

IX. Product Warranty

INKSYSTEM warrants its products to be free from defects in material or workmanship. Rarely the equipment partly or completely fails within the warranty period. In these cases we do everything possible to ensure that our customers are satisfied with the purchase.
The INKSYSTEM CISS installation is free in any of the representative offices.
The warranty repairs are done quickly, with good quality and for free. The warranty duration is 12 months from the date of retail sale. Every product has a Warranty Certificate. The transportation of the failed product is provided by its owner.
Please note that the ink and the photo paper are expendable materials and there can be no returning of unsealed ink tanks and photo paper packages. When defects are found by the service managers, a replacement for a new product is performed.

Please adhere to the following points to receive a warranty service as soon as possible:

When accepting the product check if the warranty certificate is filled in correctly.

Keep the original receipt that contains the date of purchase information.
Adhere to operating conditions that are provided in the User’s Manual, or on the web-page of the specific product.
Try to avoid mechanical damages when operating the product: chippings, dents, fractures, scratches, etc.

We cannot provide a warranty repair under several conditions:

If the warranty certificate is wrongly filled in.
If the device has mechanical damages: chippings, dents, fractures, scratches, etc.
If the defect appeared under the circumstances of insuperable forces, accidents, intended or careless actions of the user or a third party.
If the ink used was not manufactured by “INKSYSTEM” (South Korea)
If the printing limit was exceeded – more than 100 000 prints.

The “INKSYSTEM” Company excludes for itself any liability for incidental, consequential, indirect, special, or punitive damages of any kind to people, pets or property if the stated damages have been affected because of rules and operational conditions / product installation disregard. The Company also excludes any liability for intentional or careless actions of the user or third parties, for loss of revenue or profits, loss of business, loss of information or date, or other financial loss arising out of or in connection with the sale, installation, maintenance, use, performance, failure, or interruption of the possibility of such damages.

I ordered Stylus Photo R200. My friends recommended me to buy it with CISS by INKSYSTEM. I doubted for a while, but they persuaded me. It performs pretty well. I was pleased by low cost of photos (it seems to me it is nearly 25 times less comparing to original cartridges). I’m glad that photos are without granularity. By and large, it is a good and rather inexpensive printer.
Alyssa,Plymouth 23/10/2012, 11:14

Cool store. The prices here more than affordable and cool techniques also. CISS is of first class!
Nicole ,Ashburton 18/12/2012, 17:47

Your name:

Your City:


Confirmation code

Do not forget to buy!
Set of Ink for Epson Stylus Photo R200
*incl. VAT
excl. ink and shipping price
35.94 £

You have chosen Epson Stylus Photo R200

141.16 £
You can save ##economy## £
Would you like to buy the second set of ink with a discount and save ##economy## £?
Yes, I'd love to!
No, thanks!