PaymentsHere are the ways how you can pay for the ordered item.
1) Payment by PayPal/Credit Card
The procedure is very simple, all you need is to select desired goods, proceed to check-out, select PayPal or Credit Card payment method and you will be forwarded to the PayPal web-invoice page, where you will be able to pay securely either with your personal PayPal account or your Credit Card.
2) Wire transfer.
A wire transfer can be made from one bank account to another bank account or through a transfer of cash at a cash office. Please, check whether goods are available on our stocks before transfer. Contact our managers to get a pro forma invoice for payment.
Information for transfer:
Bank account number: 93146502
Recipient: Inksystem-UK LTD
Address: Unit 7, Carbery Enterprise Park, 26 White Hart Lane, London N17 8DP
Title transfer: Order No.(please give your order number)
Amount of transfer: 120.55 GBP (specify the amount that you pay)
3) Pay on the spot.
You pay in cash when you receive your goods at our office in London or make payment on delivery in the post office (available for residents of the UK).
4) Payment via Western Union
To pay over WU please contact the respective office directly for your invoice.
* For wholesale purchases, please, contact us separately.
We warrant reliability and stability of INKSYSTEM ™ products.
Products of INKSYSTEM ™ are famous for their reliability and safety, low printingprice,and cost-effective ink-jet printing.
The guarantee applies to the products delivered to Mainland Europe as well as Ireland, Iceland, and Great Britain.
Warrantyfor INKSYSTEM ™products
The maximum warranty period for INKSYSTEM ™ products ranges from 12 to 24 months * from the date of purchase. The warranty period for each item is indicated in the description box on the website.
The warranty repair of INKSYSTEM ™ products is free of charge (for INKSYSTEMcustomers).
The warranty applies to the products
- purchased in INKSYSTEM ™ store chain;
- purchased on the website of the INKSYSTEM ™ online store (www.ink-system.co.uk).
For getting warranty services, the following conditions of INKSYSTEM ™ productsoperation must be observed:
- When receiving products, check that the warranty card isfilledproperly;
- Keep a check / invoice, which must be presented at the acquisition date;
- comply with the conditions written on the label, in the manualwhich comes with the product;
- Avoid mechanical damage during the product operation, such as cracks, dents, scratches, etc.;
- In case of damage or equipment operation errors, pleasecontact INKSYSTEM Service Center as soon as possible. If necessary, send the goods to the address of the service center of INKSYSTEM:
Unit 7, Carbery Enterprise Park,
36 White Hart Lane,
London N17 8DP
Tel.: +44 (020) 33 02 02 55
• Damages or defects caused by the consumer;
• Damages caused by natural disasters;
• Defects caused by exposure of heat or foreign objects, fluids, or insects in the inner parts;
• Damages caused by negligence in operating conditions (in contrast to the recommendations contained in the User`s Guide).
Warranty is not valid if:
• The product has mechanical damages such as fragments, parts, cracks, scratches, etc.;
• The identifiers have been removed or it is not possible to determine ownership of INKSYSTEM ™ (absence of additional notes, labels, etc.);
• The article has already been repaired, or inner parts have been replaced;
• The product was incorrectly installed by the user;
• The problem wascaused by natural disasters, accidents, willful negligence of a consumer or a third party;
• The client uses not INKSYSTEM ™ ink;
• Printing limit of 25,000 prints has been exceeded.
Warranty for not INKSYSTEM ™ products
The client can use warranty provided by the manufacturer.
NOTE: Warranty cases are described by the manufacturer.
To make use of the warranty, please contact INKSYSTEM Service Center:
Tel.: +44 (020) 33 02 02 55
You can contact INKSYSTEM company management directly via the following e-mail: email@example.com
• warranty period depends on the product type
Loyalty Programme from INKSYSTEM Company is specially designed for our customers – that is, first of all, gratitude for your trust.
INKSYSTEM® Loyalty Programme means granting discounts for regular customers of the company. According to the programme, when making the first purchase in web-shops or in companies, which are certified partners of INKSYSTEM®, you receive a discount card that allows you to make all further purchases with 5% discount. The duration of discount card is not limited and can be applied to all certified points of INKSYSTEM®. Discount card is valid for INKSYSTEM products only.
The company provides customers with plastic discount card INKSYSTEM with id information on it. Each card has its own embossed number. The card carries the city code and serial number of the card owner. This information allows us to personalise the card and give you a discount.
Discount cards are an essential component of INKSYSTEM® loyalty programme and are issued when receiving the order. To get a card, a customer must fill in a questionnaire in the representative office of the company.
When ordering through an online shop, you can request a discount card by filling in a form.
Discount programme from INKSYSTEM Company allows you to receive additional savings when buying our products. We care about provided services to meet all your requirements and you to be always pleased with the quality of our products!
Epson Stylus Office B40W
This high-speed business inkjet has Ethernet and Wi-Fi flexibility built-in. It?s quick and easy for networked users to print everything from pin-sharp documents to colour business presentations.
105.59 £not in stock
Report when the product is available again
Printer Epson Stylus Office B40W
If the facility you are looking for is some low - priced and quality printer with numerous functions, an epson b40w printer is the best choice for you as it is believed to be one of the office appliances that are offered by the Epson Company. The quality and functionality of their devices are known for numerous years, that is the reason why all - in - one device can be the best solution for people owning small offices or compact businesses.
Still, large office owners shouldn't ignore it as well. Those people who have chosen this facility have a chance to be delivered qualitative photos both in office and at home. This is the true reason why so many clients in London, Nottingham, Manchester, Birmingham, Edinburgh choose Epson Stylus Office B40W.
The Epson office b40w is a cube-shape gadget which is considered to be a standard design for Epson office appliances. This device is produced in matt black and glossy black colours which make it pretty stylish. On a front panel of a gadget you can find all the necessary buttons which help to control the process of printing different types of photos, documents and pictures.
This 4-colour inkjet printer has Piezo Electric printing head which makes an Epson stylus b40w very well functioning; therefore, if you make your final choice of such a device you will be perfectly convinced that your photos are delivered in the highest quality possible. All users of this model agree that an Epson b40w provides great advantages as it produces 2 pl minimal ink print droplet and spreads ink with 384 nozzles black and 128 nozzles, each colour (yellow, cyan, magenta).
Epson Stylus Office B40W offers the maximum possible print resolution of approximately 5760 x 1440 optimised dpi. At the same time it is a pretty speedy one as it delivers black A4 38 ppm, and coloured - 38 ppm. The capacity of a device is 120 sheets of A4 plain paper in an input paper tray which is a standard for this model and the great majority of the other devices of the type. You are recommended to use 64 g/m2 paper type to ensure the best quality of printing.
Your Epson WorkForce Pro WP-4595DNF will be easy to connect to your computer as it is equipped both with Hi-Speed USB which is compatible with the USB 2.0 specification and a widely opted for Wi-Fi connection of LAN IEEE 802.11b/g type. This way you will find no problems with dealing with a facility. The voltage necessary is about AC 220-240V. But power consumption is quite economic - 16W while printing and 4.5W in sleep mode. You may install have a CISS facility for your Epson Stylus Office BX305FW and save up to 20 times when printing your photos.
Number of colors:
dye-based ink "INKSYSTEM" (South Korea), 4 colors 130 ml
Material of CISS:
Country of origin:
the same as original
Numbers of original cartridges:
Installation Manual on Continuous ink supply system (CISS) For EPSON B40W
Thank you for using the “INKSYSTEM” Continuous ink supply system. It is the best device for an inkjet printer, and it will definitely decrease your printing costs. Before using this system, please read this manual carefully. The pictures in this manual may be different with the real ones. Here just for your reference.
Remarks: Some pictures maybe different from the real products, especially for the external ink tank, these pictures are just for reference, please handle according the real products.
I. Inspection before installation
A. Check whether all the accessories available or not.
B. Check whether CISS is pulling out, if tube is disconnected.
Please contact your local distributor if have noticed problems.
II. Test printer
2. Enter nozzle test option (2-1), print nozzle test sheet to see whether nozzle is normal (2-2, 2-3).
3. If printer is alright, please print a picture to see the result.
Note: This system will not cause any damage on your printer.
Ill. Installation Procedures
1. Setting up the system
Place the system on the table, check to see if there is any ink in each of the air balance tube. If yes, you need to remove the ink in the balance tubes by the following steps:
1) Pull sealed plug out (3-1-1).
2) Use the injector to draw ink.
3) Put the sealed plug back.
4) Pull out the in refill plug.
5) Inject the ink in the injector into the ink holding tank according to its color.
6) Put the ink refill plug back.
7) Check all the plugs to make sure they are completely sealed.
2. Replace air balance plugs
Put this system on the right side of printer, tidy up ink flow tubes, pull out an air balance plug and replace it with an air filter with the bigger side downwards. This is repeated for each air balance plug. Keep the air balance plugs for future use.
Move out cartridge holder
Press ink button (3-2-1). Move cartridge holder to the cartridge, changing position (3-2-2), pull the printer power off (3-2-3).
3. Move out cartridges
Insert screwdriver like (3-3-1), screw screwdriver like (3-3-2) until take cartridge cover off (3-3-3).
4. Change ink cartridges
Open the original cartridges cover (3-4-1), take out ink cartridges, install system cartridges (3-4-2), then press the cartridge cover back (3-4-3).
5. Fix place meter
Find right place on the right side of printer according to place-meter (3-5-1), tear sticker cover of (3-5-2), then stick place-meter on it (3-5-3).
6. Fix wire-rack
Tear sticker cover off that on the wire rack, stick the wire-rack on the printer, do not twist the ink-flow wire.
7. Check ink-flow wire
Move cartridge holder to left side (3-7-1), then to right side (3-7-2), check if the tube is too long or too short. Move cartridge holder to right side, check if ink tube will fall down during movement, if fall down, then the holder will be blocked during printing. Generally, before shipment, we have adjusted the tube to the right size, please double check before printing.
8. Adjust tube length
If step 7 is ok, then there is no need to go through this step.
If the tube length is too short then lengthen (3-8-1) it, if too long then shorten (3-8-2). If the tube falls down, you need adjust the angle of sticker to prevent falling.
Take place meter off
Tidy ink tube up. Tear seal off, attach fixation like (3-8-3). Press ink tube while closing printer cover (3-8-4) to avoid it deforming.
9. Ready to print
Plug on power wire (3-9-1), turn printer on (3-9-2).Check whether printer and ink tube can run normally. Close printer cover and check whether it is strange noise while printing.
10. Test printer nozzle
Enter printer nozzle inspection option (3-10-1), print nozzle test sheet. If it is normal (3-10-2)), then start printing. If line is missing (3-10-3), please clean the nozzle cleaning. If one color is missing , then maybe there is air in nozzle. If it is still a little line missing after cleaning, please turn printer off and let it stay turned off for one hour or more. Please contact your local distributor if still have problem.
IV. Ink Amount Reset
It is required to change the cartridges while printing when the ink light flashes. Press the ink button to take out the cartridge holder. Press the chip reset button for 3 seconds, then press the ink button again to move back the cartridge holder, the ink amount is showing 99% again. Redo nozzle the inspection and the printer will run normally if it is alright. (Black and other colors can be handled by the same method).
V. Removing used continuous ink supply system
VI. Ink refilling
During printing, if you found out that the ink level in the tank is below the red line, please add ink according to the methods.
VII. Check air balance tube
If you discover anything strange, like a bad output, an ink dripping on paper, then check the air balance tube to see if there is ink.
If yes, please go through the “ink pump out from balance tube” according to the manual.
1. During printing, please do not take cartridges over than the printer. Please keep ink tank and printer in the same level.
2. During printing, do not inverse, lift up or lower ink tanks.
3. Please do not block up ink tanks for curiosity or for fear of less ink
4. Use CISS at clean environment and within the temperature range 15-35 degrees.
5. Please use high-quality ink to prolong and to increase printing quality.
6. During shipment or storage, please do not turn the system over and always have the holes sealed with plugs, to prevent ink leakage.
7. Please do not shake cartridges to avoid leaking.
8. Please do not unplug joint elbow, do not tear off adhesive tape seal that at the bottom of cartridge, do not touch the IС chips that sideways.
1. Please do not drink the ink and keep it away from children.
2. Do not expose the CISS or the ink to direct sunshine and do not store it at extreme temperatures.
3. Do not crush the CISS and do not drop it.
INKSYSTEM warrants its products to be free from defects in material or workmanship. Rarely the equipment partly or completely fails within the warranty period. In these cases we do everything possible to ensure that our customers are satisfied with the purchase.
The INKSYSTEM CISS installation is free in any of the representative offices.
The warranty repairs are done quickly, with good quality and for free. The warranty duration is 12 months from the date of retail sale. Every product has a Warranty Certificate. The transportation of the failed product is provided by its owner.
Please note that the ink and the photo paper are expendable materials and there can be no returning of unsealed ink tanks and photo paper packages. When defects are found by the service managers, a replacement for a new product is performed.
Please adhere to the following points to receive a warranty service as soon as possible:
When accepting the product check if the warranty certificate is filled in correctly.
Keep the original receipt that contains the date of purchase information.
Adhere to operating conditions that are provided in the User’s Manual, or on the web-page of the specific product.
Try to avoid mechanical damages when operating the product: chippings, dents, fractures, scratches, etc.
We cannot provide a warranty repair under several conditions:
If the warranty certificate is wrongly filled in.
If the device has mechanical damages: chippings, dents, fractures, scratches, etc.
If the defect appeared under the circumstances of insuperable forces, accidents, intended or careless actions of the user or a third party.
If the ink used was not manufactured by “INKSYSTEM” (South Korea)
If the printing limit was exceeded – more than 100 000 prints.
The “INKSYSTEM” Company excludes for itself any liability for incidental, consequential, indirect, special, or punitive damages of any kind to people, pets or property if the stated damages have been affected because of rules and operational conditions / product installation disregard. The Company also excludes any liability for intentional or careless actions of the user or third parties, for loss of revenue or profits, loss of business, loss of information or date, or other financial loss arising out of or in connection with the sale, installation, maintenance, use, performance, failure, or interruption of the possibility of such damages.
Cool printer. I've taken it with CISS. The quality of printing is excellent, but sometimes there are some problems with color profile.
| Brayden,Sunderland 27/11/2012, 12:25|