PaymentsHere are the ways how you can pay for the ordered item.
1) Payment by PayPal/Credit Card
The procedure is very simple, all you need is to select desired goods, proceed to check-out, select PayPal or Credit Card payment method and you will be forwarded to the PayPal web-invoice page, where you will be able to pay securely either with your personal PayPal account or your Credit Card.
2) Wire transfer.
A wire transfer can be made from one bank account to another bank account or through a transfer of cash at a cash office. Please, check whether goods are available on our stocks before transfer. Contact our managers to get a pro forma invoice for payment.
Information for transfer:
Bank account number: 93146502
Recipient: Inksystem-UK LTD
Address: Unit 7, Carbery Enterprise Park, 26 White Hart Lane, London N17 8DP
Title transfer: Order No.(please give your order number)
Amount of transfer: 120.55 GBP (specify the amount that you pay)
3) Pay on the spot.
You pay in cash when you receive your goods at our office in London or make payment on delivery in the post office (available for residents of the UK).
4) Payment via Western Union
To pay over WU please contact the respective office directly for your invoice.
* For wholesale purchases, please, contact us separately.
We warrant reliability and stability of INKSYSTEM ™ products.
Products of INKSYSTEM ™ are famous for their reliability and safety, low printingprice,and cost-effective ink-jet printing.
The guarantee applies to the products delivered to Mainland Europe as well as Ireland, Iceland, and Great Britain.
Warrantyfor INKSYSTEM ™products
The maximum warranty period for INKSYSTEM ™ products ranges from 12 to 24 months * from the date of purchase. The warranty period for each item is indicated in the description box on the website.
The warranty repair of INKSYSTEM ™ products is free of charge (for INKSYSTEMcustomers).
The warranty applies to the products
- purchased in INKSYSTEM ™ store chain;
- purchased on the website of the INKSYSTEM ™ online store (www.ink-system.co.uk).
For getting warranty services, the following conditions of INKSYSTEM ™ productsoperation must be observed:
- When receiving products, check that the warranty card isfilledproperly;
- Keep a check / invoice, which must be presented at the acquisition date;
- comply with the conditions written on the label, in the manualwhich comes with the product;
- Avoid mechanical damage during the product operation, such as cracks, dents, scratches, etc.;
- In case of damage or equipment operation errors, pleasecontact INKSYSTEM Service Center as soon as possible. If necessary, send the goods to the address of the service center of INKSYSTEM:
Unit 7, Carbery Enterprise Park,
36 White Hart Lane,
London N17 8DP
Tel.: +44 (020) 33 02 02 55
• Damages or defects caused by the consumer;
• Damages caused by natural disasters;
• Defects caused by exposure of heat or foreign objects, fluids, or insects in the inner parts;
• Damages caused by negligence in operating conditions (in contrast to the recommendations contained in the User`s Guide).
Warranty is not valid if:
• The product has mechanical damages such as fragments, parts, cracks, scratches, etc.;
• The identifiers have been removed or it is not possible to determine ownership of INKSYSTEM ™ (absence of additional notes, labels, etc.);
• The article has already been repaired, or inner parts have been replaced;
• The product was incorrectly installed by the user;
• The problem wascaused by natural disasters, accidents, willful negligence of a consumer or a third party;
• The client uses not INKSYSTEM ™ ink;
• Printing limit of 25,000 prints has been exceeded.
Warranty for not INKSYSTEM ™ products
The client can use warranty provided by the manufacturer.
NOTE: Warranty cases are described by the manufacturer.
To make use of the warranty, please contact INKSYSTEM Service Center:
Tel.: +44 (020) 33 02 02 55
You can contact INKSYSTEM company management directly via the following e-mail: email@example.com
• warranty period depends on the product type
Loyalty Programme from INKSYSTEM Company is specially designed for our customers – that is, first of all, gratitude for your trust.
INKSYSTEM® Loyalty Programme means granting discounts for regular customers of the company. According to the programme, when making the first purchase in web-shops or in companies, which are certified partners of INKSYSTEM®, you receive a discount card that allows you to make all further purchases with 5% discount. The duration of discount card is not limited and can be applied to all certified points of INKSYSTEM®. Discount card is valid for INKSYSTEM products only.
The company provides customers with plastic discount card INKSYSTEM with id information on it. Each card has its own embossed number. The card carries the city code and serial number of the card owner. This information allows us to personalise the card and give you a discount.
Discount cards are an essential component of INKSYSTEM® loyalty programme and are issued when receiving the order. To get a card, a customer must fill in a questionnaire in the representative office of the company.
When ordering through an online shop, you can request a discount card by filling in a form.
Discount programme from INKSYSTEM Company allows you to receive additional savings when buying our products. We care about provided services to meet all your requirements and you to be always pleased with the quality of our products!
Epson Stylus D120
43.82£36.52 £not in stock
Report when the product is available again
Printer Epson Stylus D120
D120 Epson Stylus is a fast and reliable color inkjet printer with high printing quality. The device is designed specially for a small business or a compact office. The D120 Epson is a perfect device, where the advantages of inkjet printing are combined with easy operation. The device is controlled by means of three buttons, and the provided soft wear will make your work more comfortable.
The D120 Epson Printer has rather sustained design without a LC display, slots for memory cards and other external elements. With its severe black casing, the device manifests simplicity and efficiency for business. The only connector, the device is equipped with, is a 2.0 USB slot, which is rather enough for its normal operation.
D120 Epson Efficiency
The D120 Epson Printer is a fastest one among this class devices - Epson Stylus Photo R285 and Epson L355. Its operation rate is 37 pages per minute for black-and-white printing and 20 pages per minute for color printing. Besides, the device can print without margins, including A4 size photos, with resolution up to 5760 x 1440 dpi. The ink drop size is 3 picolitre, while piezoelectric printing technology provided with Micro Piezo printing head guarantees high quality as well as long and stable operation of the device in a whole.
The D120 Epson Stylus with a CISS will make printing process pleasant for the User, not only because of the provided printing quality, but as well due to low cost of the supplies. To sum up, we should say, that due to its high quality, low cost and good efficiency, this printer will be extremely popular with the Users at the market of printing equipment.
4-colour inkjet printer with Dual Black Ink System, Epson Micro Piezo™ print head
nozzles Black / 59 x 3 nozzles Colour (cyan, magenta, yellow)
3 pl (minimum) with Variable-sized Droplet Technology
Epson DURABrite™ Ultra Ink
Up to 5760 x 1440 optimised dpi on suitable media using RPM (Resolution Performance Management)
Print Speed Black Text A4
Up to 37 ppm (Fastest), 25 ppm (Business quality)*
Print Speed Colour Text A4
Up to 20 ppm (Fastest), 11 ppm (Business quality)*
Print Speed Photo 10x15
Approx. 49 secs*
Hi-Speed USB - compatible with the USB 2.0 specification* *USB cable required for PC/Mac use , (not supplied in box)
120 sheets A4 plain paper
A4, Letter, Legal, 20x25 cm, 13x18 cm, 10x15 cm, 9x13 cm, 13x20 cm, 102x181mm, A6, A5, B5, Half Letter, Envelopes: No.10, DL, C6
0 mm top, left, right, bottom via custom settings in printer driver* *Otherwise 3mm top, left, right, bottom
Approx. 15 W (printing, ISO10561 letter pattern) Approx. 2 W (sleep mode) Energy Star Rating
AC 220-240 V
1 year standard warranty
Dimensions W x D x H
Epson Creativity Suite Epson Easy Photo Print Epson Web-To-Page
39 dB (according to ISO7779 Pattern with Epson, Premium Glossy Photo Paper/Photo RPM mode)
Number of colors:
dye-based ink "INKSYSTEM" (South Korea), 5 colors 130 ml
Material of CISS:
Country of origin:
the same as original
Numbers of original cartridges:
Thank you for using the “INKSYSTEM” Continuous ink supply system. It is the best device for an inkjet printer, and it will definitely decrease your printing costs. Before using this system, please read this manual carefully. The pictures in this manual may be different with the real ones. Here just for your reference.
Remarks: Some pictures maybe different from the real products, especially for the external ink tank, these pictures are just for reference, please handle according the real products.
I. Inspection before installation
A. Check whether all the accessories are present.
B. Check whether the system is retrieved normally or too much air is remained in the connecting tubes (length over 20cm).
II. Test printer
1. Check whether printer conditions are normal.
2. Enter nozzle test option (2-1), print nozzle test sheet to see whether nozzle is normal (2-2, 2-3).
3. If printer is alright, please print a picture to see the result.
Ill. Installation Procedures
1. Make the system ready
Place the system on the table, check if there is any ink in each of the air balance tube. If yes, you need to remove the ink in the balance tubes by the following steps:
1) Pull the sealed plug of the balance tube out (3-1-1).
2) Use the injector to draw all the ink out.
3) Put the sealed plug back.
4) Pull refill plug out.
5) Inject ink to the ink tanks according to their color.
6) Put refill plug back.
7) Check all the plugs to make sure they are completely sealed.
2. Replace the air balance plugs
Put this system on the right side of printer, tidy up ink flow tubes, pull out an air balance plug and replace it with an air filter with the bigger side downwards. This is repeated for each air balance plug. Keep the air balance plugs for future use. Move cartridge holder out
Press ink button (3-2-1). Move cartridge holder to the cartridge, changing position (3-2-2), pull the printer power off (3-2-3).
3. Move out cartridge holder
Insert screwdriver like (3-3-1), screw screwdriver like (3-3-2) until take cartridge cover off (3-3-3).
4. Install ink cartridges
Take cartridges out (3-4-1). Install CISS cartridges according to printer indication and press cartridge down to the place (3-4-2, 3-4-3).
5. Fix place meter
Tear sponge seal off (3-5-1).Tidy up ink tube. Stick rack onto the printer cover like (3-5-2). Make sure that tube and rack will not fall off while printing. Do not twist ink tube (3-5-3).
6. Check wire length
Move cartridge holder to the left side (3-6-1), then to the right side (3-6-2), check if the tube is too long or too short. Move cartridge holder to right side, check if ink tube will fall down during movement, if fall down, then the holder will be blocked during printing. Generally, before shipment, we have adjusted the tube to the right size, please double check before printing.
7. Adjust wire length
If step 6 is ok, then there is no need to go through this step.
If the tube length is too short then lengthen (3-7-1) it, if too long then shorten (3-7-2). If the tube falls down, you need adjust the angle of sticker to prevent falling.
8. Take off place meter
Tidy up ink tube. Tear seal off, attach fixation like (3-8-2). Press ink tube while closing printer cover (3-8-3) to avoid deforming of ink tube.
9. Prepare for print
Plug power wire on (3-9-1), turn printer on (3-9-2).Check whether printer and ink tube can run normally. Close printer cover and check whether it is strange noise while printing.
10. Check printer nozzle
Enter printer nozzle inspection option (3-10-1), print nozzle test sheet. If it is ok (3-10-2)), then can run printer. If line is missing (3-10-3), please clean the nozzle. If just one color is missing (maybe there is air in nozzle). If it is still a little line missing after several times cleaning, please turn printer off and let printer stay turned off for one hour or more. Please contact local distributor if still have problem.
It requires to change cartridges while printing (4-1-1) and ink light flash (4-1-2). Press ink button to move out cartridge holder. Press chip reset button for 3 seconds (4-1-3), repress ink button to move back cartridge holder, then ink amount shows 99% again. Redo nozzle inspection and printer can run normally if it is alright. (Black and other colors can be handled by the same method).
Note: Distinguish two kinds of chips (4-1-4). The manipulation is the same. The difference is that the chips with transferred switch should be switched downwards (4-1-5), otherwise, chips can not be recognized.
V. Removing used continuous ink supply system
Replace air filters with air plugs (5-1-1).Move out cartridge holder and take the rack off. Take the cartridges out (5-1-2) and place the cartridges on the tissue with the ink flow nozzle downwards, and let the tissue at the same level with the system ink tank (5-1-3).
VI. Refill ink
During printing, if you found out that the ink level in the tank is below the red line, please add ink according to the methods.
VII. Check air balance tube
During printing, if you find some abnormal cases, such as bad output, ink drip out on paper, then you need to check the air balance tube to see if exist ink. If yes, please do according to the manual of "ink pump out from balance tube”.
1. During printing, please do not take cartridges over than the printer. Please keep ink tank and printer in the same level.
2. During printing, do not inverse, lift up or lower ink tanks.
3. Please do not block up ink tanks for curiosity or for fear of less ink
4. Use CISS at clean environment and within the temperature range 15-35 degrees.
5. Please do not shake cartridges to avoid leaking.
IX. Product Warranty
INKSYSTEM warrants its products to be free from defects in material or workmanship. Rarely the equipment partly or completely fails within the warranty period. In these cases we do everything possible to ensure that our customers are satisfied with the purchase.
The INKSYSTEM CISS installation is free in any of the representative offices.
The warranty repairs are done quickly, with good quality and for free. The warranty duration is 12 months from the date of retail sale. Every product has a Warranty Certificate. The transportation of the failed product is provided by its owner.
Please note that the ink and the photo paper are expendable materials and there can be no returning of unsealed ink tanks and photo paper packages. When defects are found by the service managers, a replacement for a new product is performed.
Please adhere to the following points to receive a warranty service as soon as possible:
When accepting the product check if the warranty certificate is filled in correctly.
Keep the original receipt that contains the date of purchase information.
Adhere to operating conditions that are provided in the User’s Manual, or on the web-page of the specific product.
Try to avoid mechanical damages when operating the product: chippings, dents, fractures, scratches, etc.
We cannot provide a warranty repair under several conditions:
If the warranty certificate is wrongly filled in.
If the device has mechanical damages: chippings, dents, fractures, scratches, etc.
If the defect appeared under the circumstances of insuperable forces, accidents, intended or careless actions of the user or a third party.
If the ink used was not manufactured by “INKSYSTEM” (South Korea)
If the printing limit was exceeded – more than 100 000 prints.
The “INKSYSTEM” Company excludes for itself any liability for incidental, consequential, indirect, special, or punitive damages of any kind to people, pets or property if the stated damages have been affected because of rules and operational conditions / product installation disregard. The Company also excludes any liability for intentional or careless actions of the user or third parties, for loss of revenue or profits, loss of business, loss of information or date, or other financial loss arising out of or in connection with the sale, installation, maintenance, use, performance, failure, or interruption of the possibility of such damages.
It suits all my needs.
|Hamnet ,Eastbourne 12/07/2012, 16:20|
Unbelievable printing device. Earlier I printed with a laser printer but now I have a continuous ink supply system from INKSYSTEM. A laser printer consumes 30 times more money than ink-jet one with CISS. I'm very glad. Thanks a lot for qualitative production. Now I'm going to order ink and paper from your site.
| Jeffrey,Walsall 27/11/2012, 18:29|
excl. ink and shipping price