PaymentsHere are the ways how you can pay for the ordered item.
1) Payment by PayPal/Credit Card
The procedure is very simple, all you need is to select desired goods, proceed to check-out, select PayPal or Credit Card payment method and you will be forwarded to the PayPal web-invoice page, where you will be able to pay securely either with your personal PayPal account or your Credit Card.
2) Wire transfer.
A wire transfer can be made from one bank account to another bank account or through a transfer of cash at a cash office. Please, check whether goods are available on our stocks before transfer. Contact our managers to get a pro forma invoice for payment.
Information for transfer:
Bank account number: 93146502
Recipient: Inksystem-UK LTD
Address: Unit 7, Carbery Enterprise Park, 26 White Hart Lane, London N17 8DP
Title transfer: Order No.(please give your order number)
Amount of transfer: 120.55 GBP (specify the amount that you pay)
3) Pay on the spot.
You pay in cash when you receive your goods at our office in London or make payment on delivery in the post office (available for residents of the UK).
4) Payment via Western Union
To pay over WU please contact the respective office directly for your invoice.
* For wholesale purchases, please, contact us separately.
We warrant reliability and stability of INKSYSTEM ™ products.
Products of INKSYSTEM ™ are famous for their reliability and safety, low printingprice,and cost-effective ink-jet printing.
The guarantee applies to the products delivered to Mainland Europe as well as Ireland, Iceland, and Great Britain.
Warrantyfor INKSYSTEM ™products
The maximum warranty period for INKSYSTEM ™ products ranges from 12 to 24 months * from the date of purchase. The warranty period for each item is indicated in the description box on the website.
The warranty repair of INKSYSTEM ™ products is free of charge (for INKSYSTEMcustomers).
The warranty applies to the products
- purchased in INKSYSTEM ™ store chain;
- purchased on the website of the INKSYSTEM ™ online store (www.ink-system.co.uk).
For getting warranty services, the following conditions of INKSYSTEM ™ productsoperation must be observed:
- When receiving products, check that the warranty card isfilledproperly;
- Keep a check / invoice, which must be presented at the acquisition date;
- comply with the conditions written on the label, in the manualwhich comes with the product;
- Avoid mechanical damage during the product operation, such as cracks, dents, scratches, etc.;
- In case of damage or equipment operation errors, pleasecontact INKSYSTEM Service Center as soon as possible. If necessary, send the goods to the address of the service center of INKSYSTEM:
Unit 7, Carbery Enterprise Park,
36 White Hart Lane,
London N17 8DP
Tel.: +44 (020) 33 02 02 55
• Damages or defects caused by the consumer;
• Damages caused by natural disasters;
• Defects caused by exposure of heat or foreign objects, fluids, or insects in the inner parts;
• Damages caused by negligence in operating conditions (in contrast to the recommendations contained in the User`s Guide).
Warranty is not valid if:
• The product has mechanical damages such as fragments, parts, cracks, scratches, etc.;
• The identifiers have been removed or it is not possible to determine ownership of INKSYSTEM ™ (absence of additional notes, labels, etc.);
• The article has already been repaired, or inner parts have been replaced;
• The product was incorrectly installed by the user;
• The problem wascaused by natural disasters, accidents, willful negligence of a consumer or a third party;
• The client uses not INKSYSTEM ™ ink;
• Printing limit of 25,000 prints has been exceeded.
Warranty for not INKSYSTEM ™ products
The client can use warranty provided by the manufacturer.
NOTE: Warranty cases are described by the manufacturer.
To make use of the warranty, please contact INKSYSTEM Service Center:
Tel.: +44 (020) 33 02 02 55
You can contact INKSYSTEM company management directly via the following e-mail: firstname.lastname@example.org
• warranty period depends on the product type
Loyalty Programme from INKSYSTEM Company is specially designed for our customers – that is, first of all, gratitude for your trust.
INKSYSTEM® Loyalty Programme means granting discounts for regular customers of the company. According to the programme, when making the first purchase in web-shops or in companies, which are certified partners of INKSYSTEM®, you receive a discount card that allows you to make all further purchases with 5% discount. The duration of discount card is not limited and can be applied to all certified points of INKSYSTEM®. Discount card is valid for INKSYSTEM products only.
The company provides customers with plastic discount card INKSYSTEM with id information on it. Each card has its own embossed number. The card carries the city code and serial number of the card owner. This information allows us to personalise the card and give you a discount.
Discount cards are an essential component of INKSYSTEM® loyalty programme and are issued when receiving the order. To get a card, a customer must fill in a questionnaire in the representative office of the company.
When ordering through an online shop, you can request a discount card by filling in a form.
Discount programme from INKSYSTEM Company allows you to receive additional savings when buying our products. We care about provided services to meet all your requirements and you to be always pleased with the quality of our products!
Epson Stylus C91
58.29 £not in stock
Report when the product is available again
Printer Epson Stylus C91: home inkjet printer
Constructively the printer Epson C91 is presented in classic design, which has been the standard for current generation of inkjet printers for a long time. There is a vertical input tray for plain paper and also a horizontal one, which is located on the front panel of the printer, and which is used to receive the printed sheets.
The output tray is designed in excellent way − during printing, as well as during the load of A4 papers in the printer tray, the sheets are well kept and not fall out of it. The take-off assembly does not capture the extra sheets. The users in London and in Manchester approved these features positively during the demonstration of Epson Stylus C91. The volume of the vertical tray is 80 sheets of A4 office paper.
The Stylus C91 as well as Epson WorkForce Pro WP-4025DW and Epson L210 is a four-color inkjet printer, operating on the piezoelectric printing technology of 210 x 297 mm, without borders and with maximal resolution of 5760 x 1440 dpi. The main feature of this technology is the print head, which is the integral part of the printer. This head is not an usual supply, and hence there is no need to purchase it separately from the main unit. It is a positive feature as for the cost of consumables.
Printing Technology Epson C91
Piezoelectric inkjet printing
Maximum print speed (A4)
25 pages / min (mono)
Maximum print speed (A4)
13 pages / min (color)
The colors are used. printing
up to 5760 x 1440 dpi
The minimum drop size
How to download / Reception
Type of printed material
The format of printed material
A4 (210 x 297 mm); A5 (148 x 210 mm); A6 (105 x 148 mm); Legal (216 x 356 mm); Photo (13 x 18 cm), envelope DL (110 x 220 mm) envelope 10 (105 x 241 mm); Photo (10 x 15 cm); C6 (114 x 162 mm); Letter (216 x 279 mm)
PictBridge (USB) - Type A; USB 2.0 - Type B
Standard direct photo printing
PictBridge; Print Image Matching; Exif 2.2
Mac OS 10.2.8 and above, Mac OS 10.3.9 and above, Windows 2000, Windows 98, Windows Me, Windows Vista, Windows XP, Windows XP x64
Power Consumption (in Operation)
Power Consumption (standby)
The width of 43.5 cm
Height 16.5 cm
The depth of 21.9 cm
dye-based ink "INKSYSTEM" (South Korea), 4 colors 130 ml
the same as original
Installation Manual on Continuous ink supply system (CISS) For EPSON C91
Thank you for using the “INKSYSTEM” Continuous ink supply system. It is the best device for an inkjet printer, and it will definitely decrease your printing costs. Before using this system, please read this manual carefully. The pictures in this manual may be different with the real ones. Here just for your reference.
Remarks: Some pictures maybe different from the real products, especially for the external ink tank, these pictures are just for reference, please handle according the real products.
I. Inspection before installation
A. Check whether all the accessories are present.
B. Check whether the system is retrieved normally or too much air is remained in the connecting tubes (length over 20cm).
II. Test printer
2. Print a test sheet on nozzle check to see if there are gaps in lines on the printout.
3. If printer is alright, please print a picture to see the result.
Note: This system will not cause any damage on your printer.
Ill. Installation Procedures
1. Setting up the system
Place this system to the left of the printer, clean the ink-flow tubes (3-1-1), pull the air balance plug out (3-1-2) and replace it with an air filter with the bigger side faced down (3-1-3).These steps have to be repeated for each air balance plug. Do not throw away the air balance plugs.
2. Remove the cartridge holder
Select Main menu ->maintenance->cartridge change->cartridge change tools->next step->next step->confirm, then remove the cartridge holder, press the button (Pic. 3-2-2), plug out the power cord (Pic. 3-2-3).
3. Remove the cartridge cover
Take a screwdriver; place it as shown on pic. 3-3-1, then as shown on Pic. 3-3-2 to shake the screwdriver, and then remove the cartridge cover (Pic. 3-3-3).
4. Insert ink cartridges
Take out the original ink cartridges (Pic. 3-4-1), insert the system cartridges according to the color order, and press the cartridges tightly (pic. 3-4-2), stick out the ink tube as shown on pic. 3-4-3.
5. Set the ink tube
Remove the protective tape, clean the ink tube, place the ink tube to the printer body as shown on Pic. 3-5-1. When printing the protective tape should not be taken off and the ink tube cannot be twisted (Pic. 3-5-2).
6. Check the tube length
Place the cartridge holder on the left (Pic. 3-6-1), then on the right (Pic. 3-6-2), the tube should not be too long or too short. Place the cartridge holder on the right, the ink tube should not fall when moving; if it does (as shown on Pic. 3-6-3), the holder will be blocked during printing. Usually before shipment we adjust the tube to the right size, but you have to double check before printing.
7. Adjust the tube length
If everything is correct in step 6, there is no need to go through this step.
If the tube length is too short then extend it (Pic. 3-7-1), if it is too long then shorten it (Pic. 3-7-2).
If the tube falls down, adjust the sticker angle to prevent the falling.
8. Attach the ink tube
Attach the ink tube. When you close the printer lid, the pressure on the ink tube should be tight; it should not be too heavy to stop the ink-flow.
9. Ready to print
Plug the power cord in the power source (Pic. 3-9-1), turn the printer on (Pic. 3-9-2), and check whether the printer is working.
10. Printer nozzle test
Select the “printer nozzle check” option (Pic. 3-10-1); print a test page, if it is alright then you can start using the printer. If not, then clean the nozzle. If only a line for one color is missing after cleaning, turn the printer off and let it stay turned off for one hour or more. The air bubble clogging the nozzle will dissipate, allowing you to print. If the problem will still be present, then contact your local distributor.
IV. Ink Amount Reset
It is required to change the cartridges while printing when the ink light flashes. Press the ink button to take out the cartridge holder. Press the chip reset button for 3 seconds, then press the ink button again to move back the cartridge holder, the ink amount is showing 99% again. Redo nozzle the inspection and the printer will run normally if it is alright. (Black and other colors can be handled by the same method).
Note: There are two kinds of chips. They are handled in a similar way. The difference is that the chips with transferred switches should be switched downwards; otherwise the chips will not be recognized.
V. Removing used continuous ink supply system
VI. Ink refilling
If you found out that the ink level in the tank is below the red line, add the ink according to the methods above.
VII. Check air balance tube
If you discover anything strange, like a bad output, an ink dripping on paper, then check the air balance tube to see if there is ink.
If yes, please go through the “ink pump out from balance tube” according to the manual.
1. When printing, do not take the cartridges out of the printer. Keep the ink tank and printer at the same level.
2. When printing, do not turn over, lift up or lower the ink tanks.
3. Do not block up the ink tanks out of curiosity or fear that there is no ink.
4. Use the CISS in a clean environment and within the 15-35 C temperature range.
5. Use high-quality ink to increase the printing quality.
6. During shipment or storage do not turn the system over and always have the holes sealed with plugs, to prevent ink leakage.
1. Please do not drink the ink and keep it away from children.
2. Do not expose the CISS or the ink to direct sunshine and do not store it at extreme temperatures.
3. Do not crush the CISS and do not drop it.
IX. Product Warranty
INKSYSTEM warrants its products to be free from defects in material or workmanship. Rarely the equipment partly or completely fails within the warranty period. In these cases we do everything possible to ensure that our customers are satisfied with the purchase.
The INKSYSTEM CISS installation is free in any of the representative offices.
The warranty repairs are done quickly, with good quality and for free. The warranty duration is 12 months from the date of retail sale. Every product has a Warranty Certificate. The transportation of the failed product is provided by its owner.
Please note that the ink and the photo paper are expendable materials and there can be no returning of unsealed ink tanks and photo paper packages. When defects are found by the service managers, a replacement for a new product is performed.
Please adhere to the following points to receive a warranty service as soon as possible:
When accepting the product check if the warranty certificate is filled in correctly.
Keep the original receipt that contains the date of purchase information.
Adhere to operating conditions that are provided in the User’s Manual, or on the web-page of the specific product.
Try to avoid mechanical damages when operating the product: chippings, dents, fractures, scratches, etc.
We cannot provide a warranty repair under several conditions:
If the warranty certificate is wrongly filled in.
If the device has mechanical damages: chippings, dents, fractures, scratches, etc.
If the defect appeared under the circumstances of insuperable forces, accidents, intended or careless actions of the user or a third party.
If the ink used was not manufactured by “INKSYSTEM” (South Korea)
If the printing limit was exceeded – more than 100 000 prints.
The “INKSYSTEM” Company excludes for itself any liability for incidental, consequential, indirect, special, or punitive damages of any kind to people, pets or property if the stated damages have been affected because of rules and operational conditions / product installation disregard. The Company also excludes any liability for intentional or careless actions of the user or third parties, for loss of revenue or profits, loss of business, loss of information or date, or other financial loss arising out of or in connection with the sale, installation, maintenance, use, performance, failure, or interruption of the possibility of such damages.
We use Epson Stylus C91 that we bought in INKSYSTEM online-shop. The printer is great. It prints fast and delivers imprints of good quality. The only drawback is that when you make a long pause in printing, the print head starts to dry out and results show bad rendition. So you have to clean the head. It is a bit frightful to do it on your own, so you I have to commute to technical service. I glad I have CISS as it really helps save significantly.
|Lauren,Wakefield 23/10/2012, 11:17|
A wonderful printer. It is very similar to the previous model of the same line Stylus C79, but the speed of printing is slightly faster, than in C79. The performance is not too significant, but for large-volume printing the result is quite appreciable.
|Abraham ,Beckenham 18/12/2012, 17:50|
excl. ink and shipping price
excl. ink and shipping price