PaymentsHere are the ways how you can pay for the ordered item.
1) Payment by PayPal/Credit Card
The procedure is very simple, all you need is to select desired goods, proceed to check-out, select PayPal or Credit Card payment method and you will be forwarded to the PayPal web-invoice page, where you will be able to pay securely either with your personal PayPal account or your Credit Card.
2) Wire transfer.
A wire transfer can be made from one bank account to another bank account or through a transfer of cash at a cash office. Please, check whether goods are available on our stocks before transfer. Contact our managers to get a pro forma invoice for payment.
Information for transfer:
Bank account number: 93146502
Recipient: Inksystem-UK LTD
Address: Unit 7, Carbery Enterprise Park, 26 White Hart Lane, London N17 8DP
Title transfer: Order No.(please give your order number)
Amount of transfer: 120.55 GBP (specify the amount that you pay)
3) Pay on the spot.
You pay in cash when you receive your goods at our office in London or make payment on delivery in the post office (available for residents of the UK).
4) Payment via Western Union
To pay over WU please contact the respective office directly for your invoice.
* For wholesale purchases, please, contact us separately.
We warrant reliability and stability of INKSYSTEM ™ products.
Products of INKSYSTEM ™ are famous for their reliability and safety, low printingprice,and cost-effective ink-jet printing.
The guarantee applies to the products delivered to Mainland Europe as well as Ireland, Iceland, and Great Britain.
Warrantyfor INKSYSTEM ™products
The maximum warranty period for INKSYSTEM ™ products ranges from 12 to 24 months * from the date of purchase. The warranty period for each item is indicated in the description box on the website.
The warranty repair of INKSYSTEM ™ products is free of charge (for INKSYSTEMcustomers).
The warranty applies to the products
- purchased in INKSYSTEM ™ store chain;
- purchased on the website of the INKSYSTEM ™ online store (www.ink-system.co.uk).
For getting warranty services, the following conditions of INKSYSTEM ™ productsoperation must be observed:
- When receiving products, check that the warranty card isfilledproperly;
- Keep a check / invoice, which must be presented at the acquisition date;
- comply with the conditions written on the label, in the manualwhich comes with the product;
- Avoid mechanical damage during the product operation, such as cracks, dents, scratches, etc.;
- In case of damage or equipment operation errors, pleasecontact INKSYSTEM Service Center as soon as possible. If necessary, send the goods to the address of the service center of INKSYSTEM:
Unit 7, Carbery Enterprise Park,
36 White Hart Lane,
London N17 8DP
Tel.: +44 (020) 33 02 02 55
• Damages or defects caused by the consumer;
• Damages caused by natural disasters;
• Defects caused by exposure of heat or foreign objects, fluids, or insects in the inner parts;
• Damages caused by negligence in operating conditions (in contrast to the recommendations contained in the User`s Guide).
Warranty is not valid if:
• The product has mechanical damages such as fragments, parts, cracks, scratches, etc.;
• The identifiers have been removed or it is not possible to determine ownership of INKSYSTEM ™ (absence of additional notes, labels, etc.);
• The article has already been repaired, or inner parts have been replaced;
• The product was incorrectly installed by the user;
• The problem wascaused by natural disasters, accidents, willful negligence of a consumer or a third party;
• The client uses not INKSYSTEM ™ ink;
• Printing limit of 25,000 prints has been exceeded.
Warranty for not INKSYSTEM ™ products
The client can use warranty provided by the manufacturer.
NOTE: Warranty cases are described by the manufacturer.
To make use of the warranty, please contact INKSYSTEM Service Center:
Tel.: +44 (020) 33 02 02 55
You can contact INKSYSTEM company management directly via the following e-mail: firstname.lastname@example.org
• warranty period depends on the product type
Loyalty Programme from INKSYSTEM Company is specially designed for our customers – that is, first of all, gratitude for your trust.
INKSYSTEM® Loyalty Programme means granting discounts for regular customers of the company. According to the programme, when making the first purchase in web-shops or in companies, which are certified partners of INKSYSTEM®, you receive a discount card that allows you to make all further purchases with 5% discount. The duration of discount card is not limited and can be applied to all certified points of INKSYSTEM®. Discount card is valid for INKSYSTEM products only.
The company provides customers with plastic discount card INKSYSTEM with id information on it. Each card has its own embossed number. The card carries the city code and serial number of the card owner. This information allows us to personalise the card and give you a discount.
Discount cards are an essential component of INKSYSTEM® loyalty programme and are issued when receiving the order. To get a card, a customer must fill in a questionnaire in the representative office of the company.
When ordering through an online shop, you can request a discount card by filling in a form.
Discount programme from INKSYSTEM Company allows you to receive additional savings when buying our products. We care about provided services to meet all your requirements and you to be always pleased with the quality of our products!
All-in-one Epson Stylus Photo RX610/RX615
Epson RX615 is an excellent price, quality, design and functionality among the IFIs and printer A4 format.
143.7 £not in stock
Report when the product is available again
Printing Technology Printer Inkjet printing
Maximum print resolution 5760h1440 dpi
Number of colors used to obtain images 6
Size and density of paper 64-90 g/m2 (plain paper), a maximum of 300 g/m2 (for the original media Epson) Printing: 10 x 15 cm, 10 "x 8", 13 x 18 cm, 13 x 20 cm, 16:9 Wide size, 20 x 25 cm, 3.5 x 5'', 4 "x 6", 5 "x 8", 9 x 13 cm, A4, A5, A6, B5, CD, 12 cm, CD, 8 cm, Legal, Letter, MCD, envelope C6 (114 x 162 mm), Envelope DL (110 x 220 mm), envelope number 10 (104 x 240 mm),
Printsnelheid 39 ppm (b / w), 38 ppm (tsv.)
LCD Monitor LCD 6,3 cm, TFT
Memory card compatibility CompactFlash, MicroDrive, Memory Stick, MagicGate Memory Stick, Memory Stick PRO, SD Card (SDHC), MicroSD, MultiMedia Card, xD-Picture Card, xD-Picture Card-M, xD-Picture Card-H
Supported Operating Systems Mac OS 10.2.8 and later, Mac OS 10.3.9 and later, Windows 2000, Windows 98, Windows Me, Windows XP, Windows XP x64
Interface USB 2.0
Weight (kg) 12
Dimensions (L x W x H) mm 237h446x432
Epson Expression Photo XP-850
Epson WorkForce Pro WP-4525DNF
Number of colors:
The refillable cartridges are made similar to original cartridges; however they have auto-reset chips which allow adding ink in each cartridge again and again, up to several hundreds of times.
These cartridges are easy to refill, there is no need to remove the cartridges from the printer.
The cartridges are made of high-quality plastic, and can be changed on their positions that easily allow to alter them from one model to another or to replace the damaged cartridge.
dye-based ink "INKSYSTEM" (South Korea), 6 colors 100 ml
Material of cartridges:
Installation Manual on Continuous ink supply system (CISS) For EPSON RX610/615
Thank you for using the “INKSYSTEM” Continuous ink supply system. It is the best device for an inkjet printer, and it will definitely decrease your printing costs. Before using this system, please read this manual carefully. The pictures in this manual may be different with the real ones. Here just for your reference.
Remarks: Some pictures maybe different from the real products, especially for the external ink tank, these pictures are just for reference, please handle according the real products.
I. Inspection before installation
B. Check whether the system is pulling out if tube is disconnected
II. Test printer
2. Print a test sheet on nozzle check to see if there are gaps in lines on the printout.
3. If printer is alright, please print a picture to see the result.
Note: This system will not cause any damage on your printer.
1. Setting up the system
Put this system on the left side of printer, tidy up ink flow tubes (3-1-1), pull the air balance plug out and replace it with an air filter with the bigger side down-wards (3-1-2).This is repeated for each air balance plug. Keep the air balance plugs for future use.
2. Move out cartridge holder:
Press "cartridge change" button (3-2-1), move cartridge holder out to cartridge change position, plug off power source (3-2-2).
С. RX560/RX580/RX590/ RX585/RX595/R^610/RX680
Press "setup", Press " ►" to InkLevels" , then press "OK" , press "▼" to "Change Ink Cartridge" , choose "OK". Mover out cartridge holder (3-2-3), plug off the power source.
3. Take cartridge cover off
Use screwdriver (3-3-1), push screwdriver forward to let cartridge cover move for 2mm (3-3-2), use hand to press cover clip, use screwdriver to insert position, lift up the clip upside (if clip broke, it does not matter), then take away cover clip and take cartridge cover off.
Open cartridge cover a little, insert screwdriver, push screwdriver, lift up cartridge cover, and then take cover off.
4. Insert ink cartridges
Take out original ink cartridges, insert system cartridges according the color order, press down the cartridges tightly (3-4-1).
5. Adjust tube fix
A.R260/R265/R270 no needs adjustment
B. R280/R285/R290 no needs adjustment
C.R360/R380/R390 no needs adjustment
D.RX560/RX580/RX590 needs adjustment as follows:
The two stickers of these models should do adjustment (unless dealers do it in advance), otherwise, it will damage the function. Use one hand to scratch ink tube, another hand mover first sticker to 2cm as 3-5-1, then move second sticker to 8cm as 3-5-2.
6. Fix ink tube
Tidy up ink tube, fix tube as (3-6-1). During printing, the ink tube and sticker can't be pulled off, can't be twist as (3-6-2).
Tidy up ink tube, fix tub. During printing, the ink tube and sticker can't be pulled off, can't be twist.
Tidy up ink tube, fix tube. During printing, the ink tube and sticker can't be pulled off, can't be twist
7. Check ink tube
Move cartridge holder, be sure it will not be clogged by sticker, then move cartridge holder to left side(3-7-1), then to right side(3-7-2), check if the ink tube will be too long or too short. Generally, the tube has been adjusted to the right size before shipment, please double check.
8. Adjust tube length
If step 7 is ok, skip this step.
Press sticker, then lengthen it (3-8-1) or shorten it (3-8-2), redo step 8 to adjust tube to right lengthen.
9. Fix ink tube
C. R360/R380/R390: Fix sticker to 3-9-1, pay attention not let printer cover to crush ink tube when close the cover (3-9-2), otherwise the ink can not flow smoothly
10. Ready for print
Plug power source on (3-10-1), turn the printer on (3-10-2), and check if printer work or not.
11. Test printer nozzle
Enter printer nozzle inspection option (3-11-1), print nozzle test sheet. If it is normal (3-11-2), then start printing. If line is missing (3-11-3), please clean the nozzle cleaning. If one color is missing , then maybe there is air in nozzle. If it is still a little line missing after cleaning, please turn printer off and let it stay turned off for one hour or more. Please contact your local distributor if still have problem.
12. Product Warranty
INKSYSTEM warrants its products to be free from defects in material or workmanship. Rarely the equipment partly or completely fails within the warranty period. In these cases we do everything possible to ensure that our customers are satisfied with the purchase.
The INKSYSTEM CISS installation is free in any of the representative offices.
The warranty repairs are done quickly, with good quality and for free. The warranty duration is 12 months from the date of retail sale. Every product has a Warranty Certificate. The transportation of the failed product is provided by its owner.
Please note that the ink and the photo paper are expendable materials and there can be no returning of unsealed ink tanks and photo paper packages. When defects are found by the service managers, a replacement for a new product is performed.
Please adhere to the following points to receive a warranty service as soon as possible:
When accepting the product check if the warranty certificate is filled in correctly.
Keep the original receipt that contains the date of purchase information.
Adhere to operating conditions that are provided in the User’s Manual, or on the web-page of the specific product.
Try to avoid mechanical damages when operating the product: chippings, dents, fractures, scratches, etc.
We cannot provide a warranty repair under several conditions:
If the warranty certificate is wrongly filled in.
If the device has mechanical damages: chippings, dents, fractures, scratches, etc.
If the defect appeared under the circumstances of insuperable forces, accidents, intended or careless actions of the user or a third party.
If the ink used was not manufactured by “INKSYSTEM” (South Korea)
If the printing limit was exceeded – more than 100 000 prints.
The “INKSYSTEM” Company excludes for itself any liability for incidental, consequential, indirect, special, or punitive damages of any kind to people, pets or property if the stated damages have been affected because of rules and operational conditions / product installation disregard. The Company also excludes any liability for intentional or careless actions of the user or third parties, for loss of revenue or profits, loss of business, loss of information or date, or other financial loss arising out of or in connection with the sale, installation, maintenance, use, performance, failure, or interruption of the possibility of such damages.