Payment
bank bank
Shipping
bank bank
Warranty
bank bank
Loyalty Programme
bank bank

Epson Stylus Office TX600FW

  • This versatile 4-in-1 comes with Wi-Fi, fax and an automatic document feeder. You can print photos, make copies and send faxes without a PC using the 6.3 cm LCD viewer.

  • 175.31 £
    not in stock
  • We recommend an analog:
    103.99 £
    in stock
Epson Stylus Office TX600FW

Manufacturer
Epson

Technology Printer Epson TX600FW
Inkjet printing

Maximum print resolution
5760x1440 dpi

Number of colors used to obtain images
4

Size and density of paper
10 x 15 cm, 13 x 18 cm, 20 x 30 cm, 3,5 x 5 ", 4 x 6'', 5 x 8'', 8''x 10 9 x 13 cm, A4, A5, A6 , B5, Envelope C6 (162 x 114 mm), Envelope DL (220 x 110 mm), Envelope No 10 (241,3 x 104,8 mm), Half Letter, Legal, Letter. 60-95g/m2

Print Speed
38 pages / min. (b / w and color)

LCD Monitor
LCD screen of 6.3 cm for viewing and editing photos

Memory Card Compatibility
Stick, Memory Stick PRO MagicGate Memory Stick, Multi Media Card, xD-Picture card, xD-Picture card Type-M, xD-Picture card Type-H, SD, SDHC. Through the adapter: MagicGate Memory Stick Duo, Memory Stick Duo Memory Stick PRO Duo, MiniSD, MiniSDHC, MicroSD, MicroSDHC

Print area Epson TX600FW
210 x 297 mm

Supported Operating Systems
Mac OS X 10.3.9 * and above, Microsoft Vista, Microsoft Windows XP, Microsoft Windows XP x64

Interface
Wi Fi, Bluetooth (with adapter)

Weight (kg)
8.3

Dimensions (L x W x H) mm
461x346x236


Look also:  
Epson WorkForce M200
Epson Stylus SX130


CISS

Number of colors:
4

Ink:
dye-based ink "INKSYSTEM" (South Korea), 4 colors 130 ml

Material of CISS:
polycarbonate

Guarantee:
1 year

Country of origin:
South Korea

Chips:
the same as original

Numbers of original cartridges:
T0732, T0734, T0733, T0731

Installation Manual on Continuous ink supply system (CISS) For EPSON TX600FW

Thank you for using the “INKSYSTEM” Continuous ink supply system. It is the best device for an inkjet printer, and it will definitely decrease your printing costs. Before using this system, please read this manual carefully. The pictures in this manual may be different with the real ones. Here just for your reference.
Remarks: Some pictures maybe different from the real products, especially for the external ink tank, these pictures are just for reference, please handle according the real products.



I. Inspection before installation
A. Check whether all the accessories are present.
B. Check whether the system is retrieved normally or too much air is remained in the connecting tubes (length over 20cm).

I. Test printer

1. Check whether printer conditions are present.

2. Enter nozzle test option (2-1), print nozzle test sheet to see whether nozzle is normal or not (2-2, 2-3).



3. If printer is alright, please print a picture to see the result.
Note: This system will not cause any damage on your printer.

ll. Installation Procedures

1. Setting up the system
Put the system on the right side of the printer. Tidy up ink tube (3-1 -1), pull out air plugs and keep them well for next use (3-1-2), install air filters (5pcs) (put them with the bigger side) (3-1-3).



2. Move out cartridge holder
Press ink button (3-2-1). Move cartridge holder to the cartridge, changing position (3-2-2), pull the printer power off (3-2-3).



3. Take cartridge cover off
Insert screwdriver like (3-3-1), screw screwdriver like (3-3-2) until take cartridge cover off (3-3-3).

4. Install ink cartridges
Take off original cartridge, move cartridge holder to the left side, pass cartridge through printer. Move cartridge holder to cartridge-change position. Install CISS special cartridge into printer according to printer indication and press cartridge to the right place. Move button chip to the right position or cartridge can not be recognized.

5. Check tube length
Move cartridge holder to the left side, then right side and check whether ink tubeis too long or too short. Move cartridge holder to the cartridge-changing place and check whether Ink tube will fall on the paper board. Generally, we have adjusted ink tube to the right size before shipment (lf it is too long or too short, please double check before printing).

6. Adjust tube length
If step 6 is ok, then there is no need to go through this step.
If the tube length is too short then lengthen it, if too long then shorten. If the tube falls down, you need adjust the angle of sticker to prevent falling.

7. Fix the other side of ink tube
Attach sticker to position. When printer cover close or paper support close, pay
attention, do not to let them crush the ink tube.



8. Ready for printing
Plug power wire on (3-8-1), turn printer on. Check whether printer and ink tube can run normally or cannot. Close printer cover and check whether it is strange noise while printing.

9. Test printer nozzle
Enter printer nozzle inspection option, print nozzle test sheet. If it is normal, then can start using normally. If line is missing, please do the nozzle cleaning. If just single color missing (maybe there is air in nozzle) or if it is still a little line missing after cleaning, please let printer stay turned off for one hour or more. Please contact your local distributor if you still have problem.

III. Ink Amount Reset

It is requires to change cartridges while printing (4-1-1) and ink light flash (4-1-2). Press ink button to move out cartridge holder. Press chip reset button for 3 seconds (4-1-3), repress ink button to move back cartridge holder, then ink amount shows 99% again. Redo nozzle inspection and printer can run normally if it is alright. (Black and other colors can be handled by the same method).
Note: Distinguish two kinds of chips. The manipulation is the same. The difference is that the chips with transferred switch should be switched downwards (4-1-1), otherwise, chips cannot be recognized.



IV. Removing used continuous ink supply system

Replace air filters with air plugs (5-1-1).Move out cartridge holder and take the rack off. Take the cartridges out (5-1-2) and place the cartridges on the tissue with the ink flow nozzle downwards, and let the tissue at the same level with the system ink tank (5-1-3).



V. Refill ink

During printing, if you found out that the ink level in the tank is below the red line, please add ink according to the methods.

VI. Check air balance tube

During printing, if you find some abnormal cases, such as bad output, ink drip out on paper, then you need to check the air balance tube to see if exist ink. If yes, please do according to the manual of "ink pump out from balance tube”.

VII. Warnings

1. During printing, please do not take cartridges over than the printer. Please keep ink tank and printer in the same level.
2. During printing, do not inverse, lift up or lower ink tanks.
3. Please do not block up ink tanks for curiosity or for fear of less ink
4. Use CISS at clean environment and within the temperature range 15-35 degrees.
5. Please use high-quality ink to prolong and to increase printing quality.
6. During shipment or storage, please do not turn the system over and always have the holes sealed with plugs, to prevent ink leakage.
7. Please do not shake cartridges to avoid leaking.
8. Please do not unplug joint elbow, do not tear off adhesive tape seal that at the bottom of cartridge, do not touch the IС chips that sideways.

VIII. Product Warranty

INKSYSTEM warrants its products to be free from defects in material or workmanship. Rarely the equipment partly or completely fails within the warranty period. In these cases we do everything possible to ensure that our customers are satisfied with the purchase.
The INKSYSTEM CISS installation is free in any of the representative offices.
The warranty repairs are done quickly, with good quality and for free. The warranty duration is 12 months from the date of retail sale. Every product has a Warranty Certificate. The transportation of the failed product is provided by its owner.
Please note that the ink and the photo paper are expendable materials and there can be no returning of unsealed ink tanks and photo paper packages. When defects are found by the service managers, a replacement for a new product is performed.

Please adhere to the following points to receive a warranty service as soon as possible:

When accepting the product check if the warranty certificate is filled in correctly.

Keep the original receipt that contains the date of purchase information.
Adhere to operating conditions that are provided in the User’s Manual, or on the web-page of the specific product.
Try to avoid mechanical damages when operating the product: chippings, dents, fractures, scratches, etc.

We cannot provide a warranty repair under several conditions:

If the warranty certificate is wrongly filled in.
If the device has mechanical damages: chippings, dents, fractures, scratches, etc.
If the defect appeared under the circumstances of insuperable forces, accidents, intended or careless actions of the user or a third party.
If the ink used was not manufactured by “INKSYSTEM” (South Korea)
If the printing limit was exceeded – more than 100 000 prints.

The “INKSYSTEM” Company excludes for itself any liability for incidental, consequential, indirect, special, or punitive damages of any kind to people, pets or property if the stated damages have been affected because of rules and operational conditions / product installation disregard. The Company also excludes any liability for intentional or careless actions of the user or third parties, for loss of revenue or profits, loss of business, loss of information or date, or other financial loss arising out of or in connection with the sale, installation, maintenance, use, performance, failure, or interruption of the possibility of such damages.







Your name:

Your City:

Comment:

Confirmation code



Do not forget to buy!
*incl. VAT
excl. ink and shipping price
0 £
 

You have chosen Epson Stylus Office TX600FW

175.31 £
You can save ##economy## £
Would you like to buy the second set of ink with a discount and save ##economy## £?
Yes, I'd love to!
No, thanks!
×