Payment
bank bank
Shipping
bank bank
Warranty
bank bank
Loyalty Programme
bank bank

Epson Stylus Photo RX690

  • Excellent photo printing photos from 10 * 15 cm up to A4. Recognized as the best photo printer, for amateurs and professionals.

  • 143.7 £
    not in stock
  • Report when the product is available again


    let me know

Short information about MFD Epson Stylus Photo RX690

We advise you a new device of the 21-st century - Multifunctional inkjet printer Epson RX690 which combines functions of photo printer, copying and scanning in one unit. Due to modern technologies, this high quality photo center allows to display the image on CD/DVD storages and to print images of different formats without using personal computer from digital photo cameras, memory cards, mobile phones and other media storages.

MFD Epson Stylus Photo RX690 - Technical characteristics

Inkjet six colors piezoelectric printing system of this photo center allows to print images of high quality. Minimal drop size is 1,5 pl., maximal resolution of image sent for printing is 5760х1440 dpi. Speed of printing Epson Stylus Photo RX690 black-white and color photos reaches incredibly high results – 40 pages/minute. Printing a photo of sizes 10х15 in economy mode will take you only 12 seconds and in standard mode – 23 seconds. Such a good indexes were reached due to improvement of the new print head and using the new processor Reload.

Multifunctional device Epson Stylus Photo RX690

Printer All-in-one Epson RX690 also performs as a home photo lab. Formats of the photos printed may be 9х13, 10х15, 10х18, 13х18, 13х20 and 20х25 cm. You can print them on glossy, matt and photo paper, cards, envelopes and even CD/DVD surfaces. Quality of printing photos is high enough, even in comparison with modern photo laboratories.

Scanning and copying will also surprise the customer with high quality results. Tablet scanner with resolution 1200х2400 dpi based on CIS-matrix gives an opportunity to scan documents and photos of formats A4 and smaller. Scanning speed is 10 msec./line – black-white and 28 msec./line – color. Besides, scanning may be done right to a flash drive with no need to use a personal computer. Copying in Epson RX690, with the same resolution as the scanner has, lets copying up to 40 pages per minute, both color and monochrome documents. Maximum number of copies is 99. Diapason of scaling during copying may be increased from 25 to 400%. An analogue of the MFD is a model Epson B-510DN, which is worth paying attention.

Compact & practical MFD Epson Stylus Photo RX690

Ability of working of Epson Stylus Photo RX690 without connecting to a stationary computer makes it practical in use. Located on the front panel of the device LC-display (6.3 cm) makes working with the printer even simpler. It must be noted that there is an opportunity of using memory cards of different sizes: CF, MS, MS MagicGate, MS PRO, SD, SD HC, MicroSD, MMC, xD, xD Type M, xD Type H, MS Duo, MiniSD, MS PRO Duo, MS Duo MagicGate, which makes Epson RX690 even more flexible in work. Printing images from a mobile phone is thanks to new Bluetooth 1.1 function. But an additional Bluetooth-adaptor C12C824383 is needed for this. Quite compact dimensions (446х432х237) will save space on your workplace and suppleness of usage will let even a pupil to deal with managing the device.

Savings when printing

Multifunctional inkjet printer Epson RX690 is equipped with a six colors system of ink supply (CLcMLmYK). Besides this, the printer provides a separate change of every of the six cartridges, which allows to use inks in a more economic way. Also, there is a possibility of installing cartridges with higher capacity that give an opportunity to print twice as much. There is an economic set of cartridges set is delivered with the printer. Full complete of cartridges in one package will save approximately 30%. Thanks to this the costs decrease and photo printing becomes not more expensive than in photo laboratories.

To conclude, printer All-in-one Epson RX690 - is a perfect variant for home, where quality photos are appreciated. Advantages of this model are compactness, its multifunctionality, high speed performance, autonomy, quality of printing, ease in work. If you are looking for a variant for an office, we advise you to pay attention to - Epson WorkForce M105, which has an additional WLAN function.

 EPSON Stylus Photo RX690

Printer Type Epson RX690
six-color (CMYKLcLm)
 
Printing Technology
Inkjet (piezoelectric)
 
Print Direction
bi-directional printing, optimized for text and graphics
 
Maximum Resolution (dpi)
5760 x 1440 optimized (Resolution Performance Management)
 
Maximum print size
A4
 
The minimum drop size (pl)
1.5
 
The configuration of the nozzles
90x6 (black, cyan, light cyan, magenta, light magenta, yellow)
 
A4 text, b / w, Economy Mode (pages / min) 37
A4 text, color, Economy Mode (pages / min) 38
10 x 15 cm photos, Fine Mode (sec / image) 30
10 x 15 cm photo, Draft Mode (sec / image) 12
 
Interface
USB Hi-Speed ​​(USB 2.0)
 
The paper tray
Sheet feed, roll feed
 
Media format
3.5 x 5''
4 "x 6"
13 x 20 cm
10 "x 8"
5 "x 8"
 
Maximum density of the carrier
300 g/m2 (original media for Epson)
64-90 g/m2 (plain media)
 
Borderless Printing
yes
 
The boundaries of the print area (on all four edges of the sheet, mm)
0 mm top, bottom, left, right / 3 mm top, bottom, left, right
 
Drivers for Windows
Windows 98 SE ***
Mac OS 10.2.8 and above
Mac OS 10.3.9 and above
Windows Me ***
Windows XP
Windows Vista
Windows 2000
Windows XP x64
 
Print Image Matching Support
yes
 
Support Exif Print (Exif 2.2)
yes
 
Printing on CD
CD / DVD drives: 8 cm, 12 cm and MCD
 
The minimum computer configuration
Windows 98 SE

Operating voltage (B)
220-240
 
AC Frequency (Hz)
50-60
 
The noise level (less than, dB)
42
 
Power consumption when printing (W)
12
 
Power consumption in standby mode (W)
1.1
 
Length x width x height (standard)
450x282x187 mm
 
Weight (kg)
5.4
 
Operating Temperature (C)
10 to 35
 
Use with air humidity (RH,%)
20 to 80
CISS

Number of colors:
6

Ink:
dye-based ink "INKSYSTEM" (South Korea), 6 colors 130 ml

Material of CISS:
polycarbonate

Guarantee:
1 year

Country of origin:
South Korea

Chips:
the same as original

Numbers of original cartridges:
T0822, T0824, T0821, T0825, T0826, T0823

Installation Manual on Continuous ink supply system (CISS) For EPSON RX690

Thank you for using the “INKSYSTEM” Continuous ink supply system. It is the best device for an inkjet printer, and it will definitely decrease your printing costs. Before using this system, please read this manual carefully. The pictures in this manual may be different with the real ones. Here just for your reference.
Remarks: Some pictures maybe different from the real products, especially for the external ink tank, these pictures are just for reference, please handle according the real products.





I. Inspection before installation

A. Check whether all the accessories are available or not.
B. Check whether the system is pulling out if tube is disconnected

II. Test printer
1. Check the printer status, and its mechanics for any damage.

2. Print a test sheet on nozzle check to see if there are gaps in lines on the printout.



3. If printer is alright, please print a picture to see the result.
Note: This system will not cause any damage on your printer.

Ill. Installation Procedures

1. Setting up the system
Put this system on the left side of printer, tidy up ink flow tubes (3-1-1), pull the air balance plug out and replace it with an air filter with the bigger side down-wards (3-1-2).This is repeated for each air balance plug. Keep the air balance plugs for future use.



2. Move out cartridge holder:
A. R260/R265/R270
Press "cartridge change" button (3-2-1), move cartridge holder out to cartridge change position, plug off power source (3-2-2).



B. R360/R380/R390

С. RX560/RX580/RX590/ RX585/RX595/R^610/RX680

Press "setup", Press " ►" to InkLevels" , then press "OK" , press "▼" to "Change Ink Cartridge" , choose "OK". Mover out cartridge holder (3-2-3), plug off the power source.



3. Take cartridge cover off
A. R260/R265/R270

B. R360/R380/R390
Use screwdriver (3-3-1), push screwdriver forward to let cartridge cover move for 2mm (3-3-2), use hand to press cover clip, use screwdriver to insert position, lift up the clip upside (if clip broke, it does not matter), then take away cover clip and take cartridge cover off.



C.RX560/RX580/RX590/RX585/RX595/RX61 0/RX680/RX685/RX690
Open cartridge cover a little, insert screwdriver, push screwdriver, lift up cartridge cover, and then take cover off.

4. Insert ink cartridges
Take out original ink cartridges, insert system cartridges according the color order, press down the cartridges tightly (3-4-1).

5. Adjust tube fix
A.R260/R265/R270 no needs adjustment

B. R280/R285/R290 no needs adjustment

C.R360/R380/R390 no needs adjustment

D.RX560/RX580/RX590 needs adjustment as follows:
The two stickers of these models should do adjustment (unless dealers do it in advance), otherwise, it will damage the function. Use one hand to scratch ink tube, another hand mover first sticker to 2cm as 3-5-1, then move second sticker to 8cm as 3-5-2.



6. Fix ink tube
A. R280/R285/R290
Tidy up ink tube, fix tube as (3-6-1). During printing, the ink tube and sticker can't be pulled off, can't be twist as (3-6-2).



B. R260/R265/R270

C.R360/R380/R390
Tidy up ink tube, fix tub. During printing, the ink tube and sticker can't be pulled off, can't be twist.

D.RX560/RX580/RX590/RX585/RX595/RX610/RX680/RX690
Tidy up ink tube, fix tube. During printing, the ink tube and sticker can't be pulled off, can't be twist

7. Check ink tube
Move cartridge holder, be sure it will not be clogged by sticker, then move cartridge holder to left side(3-7-1), then to right side(3-7-2), check if the ink tube will be too long or too short. Generally, the tube has been adjusted to the right size before shipment, please double check.



8. Adjust tube length
If step 7 is ok, skip this step.
Press sticker, then lengthen it (3-8-1) or shorten it (3-8-2), redo step 8 to adjust tube to right lengthen.



9. Fix ink tube
A. R280/R285/R290

B. R260/R265/R270

C. R360/R380/R390: Fix sticker to 3-9-1, pay attention not let printer cover to crush ink tube when close the cover (3-9-2), otherwise the ink can not flow smoothly

D. RX560/RX580/RX590/RX585/RX595/RX610/RX680/RX690



10. Ready for print
Plug power source on (3-10-1), turn the printer on (3-10-2), and check if printer work or not.



11. Test printer nozzle
Enter printer nozzle inspection option (3-11-1), print nozzle test sheet. If it is normal (3-11-2), then start printing. If line is missing (3-11-3), please clean the nozzle cleaning. If one color is missing , then maybe there is air in nozzle. If it is still a little line missing after cleaning, please turn printer off and let it stay turned off for one hour or more. Please contact your local distributor if still have problem.



12
. Product Warranty
INKSYSTEM warrants its products to be free from defects in material or workmanship. Rarely the equipment partly or completely fails within the warranty period. In these cases we do everything possible to ensure that our customers are satisfied with the purchase.
The INKSYSTEM CISS installation is free in any of the representative offices.
The warranty repairs are done quickly, with good quality and for free. The warranty duration is 12 months from the date of retail sale. Every product has a Warranty Certificate. The transportation of the failed product is provided by its owner.
Please note that the ink and the photo paper are expendable materials and there can be no returning of unsealed ink tanks and photo paper packages. When defects are found by the service managers, a replacement for a new product is performed.

Please adhere to the following points to receive a warranty service as soon as possible:

When accepting the product check if the warranty certificate is filled in correctly.

Keep the original receipt that contains the date of purchase information.
Adhere to operating conditions that are provided in the User’s Manual, or on the web-page of the specific product.
Try to avoid mechanical damages when operating the product: chippings, dents, fractures, scratches, etc.

We cannot provide a warranty repair under several conditions:

If the warranty certificate is wrongly filled in.
If the device has mechanical damages: chippings, dents, fractures, scratches, etc.
If the defect appeared under the circumstances of insuperable forces, accidents, intended or careless actions of the user or a third party.
If the ink used was not manufactured by “INKSYSTEM” (South Korea)
If the printing limit was exceeded – more than 100 000 prints.

The “INKSYSTEM” Company excludes for itself any liability for incidental, consequential, indirect, special, or punitive damages of any kind to people, pets or property if the stated damages have been affected because of rules and operational conditions / product installation disregard. The Company also excludes any liability for intentional or careless actions of the user or third parties, for loss of revenue or profits, loss of business, loss of information or date, or other financial loss arising out of or in connection with the sale, installation, maintenance, use, performance, failure, or interruption of the possibility of such damages.







Your name:

Your City:

Comment:

Confirmation code



Do not forget to buy!
Dye-based ink INKSYSTEM Black 100 ml (South Korea)
*incl. VAT
excl. ink and shipping price
6 £
 
Set of dye-based ink INKSYSTEM 100 ml (6 colours)
*incl. VAT
excl. ink and shipping price
36 £
 
Set of dye-based ink INKSYSTEM 1000 ml (6 colours)
*incl. VAT
excl. ink and shipping price
174 £
 

You have chosen Epson Stylus Photo RX690

143.7 £
You can save ##economy## £
Would you like to buy the second set of ink with a discount and save ##economy## £?
Yes, I'd love to!
No, thanks!
×