bank bank
bank bank
bank bank
Loyalty Programme
bank bank

Epson Stylus CX7300

  • 55.65 £
    not in stock
  • Report when the product is available again

    let me know
EPSON Stylus CX7300

Epson CX7300 Printing Technology
Piezoelectric inkjet printing
Paper Size

Maximum print speed (A4)
32 pages / min (mono)

Maximum print speed (A4)
32 pages / min (color)

The colors are used. Printing
4 colors

Print Resolution
up to 5760 x 1440 dpi

The minimum drop size
3 picoliter

Copy Speed
30 monochrome pages / minute (maximum)
30 color pages / min (maximum)

Type of scanner

Type of sensor
pin (CIS)
Optical Resolution
1200 x 2400 dpi

Color Depth
16 / 8 bit

Scan Width
Up to 216 mm

Scanning length
up to 297 mm

How to download / Reception
Feeder for 120 sheets (total)

The format of printed material
A4 (210 x 297 mm); A5 (148 x 210 mm); A6 (105 x 148 mm); Legal (216 x 356 mm); Letter (216 x 279 mm); Photo (13 x 18 cm), envelope DL (110 x 220 mm) 10 Envelope (105 x 241 mm); Photo (10 x 15 cm); C6 (114 x 162 mm); B5 (176 x250 mm)

Connectors for
PictBridge (USB) - Type A; USB 2.0 - Type B
Memory Card Reader
Memory Stick; CompactFlash; Microdrive; SmartMedia; Memory Stick Pro; * for some card types require an optional adapter; MultimediaCard; xD-Picture Card; Memory Stick Duo; Memory Stick Duo Pro; miniSD Card; SD Card
Standard direct photo printing

System Requirements
Mac OS X 10.3.9 and above, Microsoft Vista, Microsoft Windows 2000, Microsoft Windows 98, Microsoft Windows 98SE, Microsoft Windows Me, Microsoft Windows XP, Microsoft Windows XP x64

Power Consumption (in Operation)
12 W

Input voltage
220 - 240

Built-in Devices
Memory Card Reader

Width: 45 cm
Height 17.9 cm
Depth 34 cm

Look also: 
Epson Expression Home XP-102
Epson WorkForce WF-3530DTWF

Installation Manual on Continuous ink supply system (CISS) For EPSON CX7300

Thank you for using the “INKSYSTEM” Continuous ink supply system. It is the best device for an inkjet printer, and it will definitely decrease your printing costs. Before using this system, please read this manual carefully. The pictures in this manual may be different with the real ones. Here just for your reference.
Remarks: Some pictures maybe different from the real products, especially for the external ink tank, these pictures are just for reference, please handle according the real products.

I. Test printer
1. Check the printer status, and its mechanics for any damage.

2. Print a test sheet on nozzle check to see if there are gaps in lines on the printout.

3. If printer is alright, please print a picture to see the result.
Note: This system will not cause any damage on your printer.

ll. Installation Procedures

1. Setting up the system
Put the system on the right side of the printer. Tidy up ink tube (3-1 -1), pull out air plugs and keep them well for next use (3-1-2), install air filters (5pcs) (put them with the bigger side) (3-1-3).

2. Move out cartridge holder
Press ink button (3-2-1). Move cartridge holder to the cartridge, changing position (3-2-2), pull the printer power off (3-2-3).

3. Take cartridge cover off
Insert screwdriver like (3-3-1), screw screwdriver like (3-3-2) until take cartridge cover off (3-3-3).

4. Install ink cartridges
Take cartridges out (3-4-1). Install CISS cartridges according to the printer indication and press cartridge down to the place (3-4-2, 3-4-3).

5. Attach rack
Tear sponge seal off (3-5-1).Tidy up ink tube. Stick rack on the printer cover like (3-5-2). Make sure that tube and rack will not fall off while printing. Do not twist ink tube (3-5-3).

6. Check the tube
Place the cartridge holder on the left (Pic. 3-6-1), then on the right (Pic. 3-6-2), the tube should not be too long or too short. Place the cartridge holder on the right, the ink tube should not fall when moving; if it does (as shown on Pic. 3-6-3), the holder will be blocked during printing. Usually before shipment we adjust the tube to the right size, but you have to double check before printing.

If step 6 is normal, then there is no need to do this step. If its length is too short (3-7-1), If it’s length is too long (3-7-2), redo step 6 and adjust tube to a good condition.

8. Attach fixation
Tidy ink tube up. Tear seal off, attach fixation like (3-8-3). Press ink tube while closing printer cover to avoid it deforming.

9. Ready to print
Plug on power wire (3-9-1), turn printer on (3-9-2).Check whether printer and ink tube can run normally. Close printer cover and check whether it is strange noise while printing.

10. Test printer nozzle
Enter printer nozzle inspection option (3-10-1), print nozzle test sheet. If it is normal (3-10-2)), then start printing. If line is missing (3-10-3), please clean the nozzle cleaning. If one color is missing , then maybe there is air in nozzle. If it is still a little line missing after cleaning, please turn printer off and let it stay turned off for one hour or more. Please contact your local distributor if still have problem.

IV. Ink Amount Reset

It is requires to change cartridges while printing (4-1-1) and ink light flash (4-1-2). Press ink button to move out cartridge holder. Press chip reset button for 3 seconds (4-1-3), repress ink button to move back cartridge holder, then ink amount shows 99% again. Redo nozzle inspection and printer can run normally if it is alright. (Black and other colors can be handled by the same method).

V. Removing used continuous ink supply system

Replace air filters with air plugs (5-1-1).Move out cartridge holder and take the rack off. Take the cartridges out (5-1-2) and place the cartridges on the tissue with the ink flow nozzle downwards, and let the tissue at the same level with the system ink tank (5-1-3).

VI. Refill ink

During printing, if you found out that the ink level in the tank is below the red line, please add ink according to the methods.

VII. Check air balance tube

During printing, if you find some abnormal cases, such as bad output, ink drip out on paper, then you need to check the air balance tube to see if exist ink. If yes, please do according to the manual of "ink pump out from balance tube”.

VIII. Warnings

1. During printing, please do not take cartridges over than the printer. Please keep ink tank and printer in the same level.
2. During printing, do not inverse, lift up or lower ink tanks.
3. Please do not block up ink tanks for curiosity or for fear of less ink
4. Use CISS at clean environment and within the temperature range 15-35 degrees.
5. Please use high-quality ink to prolong and to increase printing quality.
6. During shipment or storage, please do not turn the system over and always have the holes sealed with plugs, to prevent ink leakage.
7. Please do not shake cartridges to avoid leaking.
8. Please do not unplug joint elbow, do not tear off adhesive tape seal that at the bottom of cartridge, do not touch the IС chips that sideways.

IX. Product Warranty

INKSYSTEM warrants its products to be free from defects in material or workmanship. Rarely the equipment partly or completely fails within the warranty period. In these cases we do everything possible to ensure that our customers are satisfied with the purchase.
The INKSYSTEM CISS installation is free in any of the representative offices.
The warranty repairs are done quickly, with good quality and for free. The warranty duration is 12 months from the date of retail sale. Every product has a Warranty Certificate. The transportation of the failed product is provided by its owner.
Please note that the ink and the photo paper are expendable materials and there can be no returning of unsealed ink tanks and photo paper packages. When defects are found by the service managers, a replacement for a new product is performed.

Please adhere to the following points to receive a warranty service as soon as possible:

When accepting the product check if the warranty certificate is filled in correctly.

Keep the original receipt that contains the date of purchase information.
Adhere to operating conditions that are provided in the User’s Manual, or on the web-page of the specific product.
Try to avoid mechanical damages when operating the product: chippings, dents, fractures, scratches, etc.

We cannot provide a warranty repair under several conditions:

If the warranty certificate is wrongly filled in.
If the device has mechanical damages: chippings, dents, fractures, scratches, etc.
If the defect appeared under the circumstances of insuperable forces, accidents, intended or careless actions of the user or a third party.
If the ink used was not manufactured by “INKSYSTEM” (South Korea)
If the printing limit was exceeded – more than 100 000 prints.

The “INKSYSTEM” Company excludes for itself any liability for incidental, consequential, indirect, special, or punitive damages of any kind to people, pets or property if the stated damages have been affected because of rules and operational conditions / product installation disregard. The Company also excludes any liability for intentional or careless actions of the user or third parties, for loss of revenue or profits, loss of business, loss of information or date, or other financial loss arising out of or in connection with the sale, installation, maintenance, use, performance, failure, or interruption of the possibility of such damages.

Your name:

Your City:


Confirmation code

Do not forget to buy!
Dye-based ink INKSYSTEM Black 100 ml (South Korea)
*incl. VAT
excl. ink and shipping price
6 £
Set of dye-based ink INKSYSTEM 100 ml (4 colours)
*incl. VAT
excl. ink and shipping price
24 £
Set of dye-based ink INKSYSTEM 1000 ml (4 colours)
*incl. VAT
excl. ink and shipping price
116 £

You have chosen Epson Stylus CX7300

55.65 £
You can save ##economy## £
Would you like to buy the second set of ink with a discount and save ##economy## £?
Yes, I'd love to!
No, thanks!